PumpLookupPump and motor part numbers
Mains Units

RK plunger pump

RK 24.15 H N

Part number 23819

  • 24Flow, l/min
  • 150Pressure, bar
  • 1450Speed, rpm
  • 7.2Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RK pump

Specification

Flow
24 l/min
Pressure
150 bar
Speed
1450 rpm
Absorbed power
7.2 kW
Weight
9.5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 1816Service kit, Ø22 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 1855❒ kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 1888Service kit, Ø22 mm 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2526Plunger kit, Ø22 mm 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2864Valve kit 

Exploded view

Annovi Reverberi exploded view of the RK pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960160 O-ring Ø 17,86x2,626
2 1380740 Plug6
3 1389051 Complete valve6 KIT 2864
4 880830 O-ring Ø 15,54x2,626 KIT 2864
5 1380690 Plug 1/4" G nickel-plated2
6 820510 O-ring Ø 10,82x1,782
11 840320 Ring Ø 223 KIT 1816
12 840330 Water seal Ø 223 KIT 1888
13 1380160 Piston guide Ø 223
14 961240 O-ring Ø 31,47x1,783 KIT 1888
15 840340 Water seal Ø 223 KIT 1888
16 880520 Ring3 KIT 1855
17 850370 Screw TCEI M8x168
18 1380050 Support1
19 640030 O-ring Ø 59,99x2,622 KIT 1855
20 2280340 Bearing1
21 1382770 Pump body1
22 880130 Plug1
23 1260110 Nut3
24 1260100 Washer3
25 1383340 Piston Ø 223 KIT 2526
26 1383350 Plate3
27 480480 O-ring Ø 4,48x1,783
28 1383240 Piston3
29 1380060 Pin3
30 1383020 Connecting-rod3
31 1080550 Ring3
32 1381850 Washer8
34 1780510 O-ring Ø 106x31 KIT 1855
35 1789010 Cover1
36 1343510 Screw TCEI M6x146
37 2280060 Shaft1
38 1380520 Key1
39 2282260 Ring1 KIT 1855
40 1380120 Shim 0.10 mm
40 1380130 Shim 0.19 mm
40 1380530 Shim 0.25 mm
40 1382810 Shim 0.05 mm
41 1380040 Support1
42 740290 O-ring Ø 14x1,783
43 1980740 Plug 3/8" G brass2
44 1263130 Screw TE M8x124
45 1380141 Foot2
46 1981180 Plug 3/8" G nickel-plated1
47 180101 O-ring Ø 17,5x21
48 960870 Plug 1/2" G nickel-plated1
49 1380680 Head nickel-plated1
50 1383440 Screw TCEI M8x708
77 1383140 Bearing1
78 1389262 Head assembly1
86 1260250 Level gauge1
87 1260430 Ring1
88 1780690 Plate1
89 1140450 O-ring Ø 20,24x2,621

Motor

A 4-pole motor of at least 7.2 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 132Ma4 7.51465IEC 132MIE315.3  
RN 132Ma4 7.51440IEC 132MIE115.3  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 132, 38 mm shaft (RNE 132Ma4, RN 132Ma4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 132, 38 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 38 mm motor shaft to the pump shaft.

Other Annovi Reverberi RK pumps

RK 11.14 N code 20630RK 11.20 H CRK 11.20 H NRK 11.25 H NRK 13.12 CRK 13.17 CRK 13.17 NRK 13.20 H CRK 13.20 H NRK 14.16 CRK 14.16 NRK 15.15 + F38RK 15.15 CRK 15.15 CR HONDA GX 270-QX code 20885RK 15.15 NRK 15.20 H CRK 15.20 H CR B&S VANGUARD code 20886RK 15.20 H CR HONDA GX 270-QXRK 15.20 H NRK 15.25 H NRK 15.28 H NRK 18.12 CRK 18.12 NRK 18.16 H CRK 18.20 H NRK 18.28 H NRK 21.10 C code 20656RK 21.10 NRK 21.15 H C code 20657RK 21.15 H NRK 21.20 H N code 21129RK 24.10 N