PumpLookupPump and motor part numbers
Mains Units

RMV plunger pump

RMV 2 G20 D

Part number 25107

  • 7.6Flow, l/min
  • 140Pressure, bar
  • 3400Speed, rpm
  • 2.2Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi RMV pump

Specification

Flow
7.6 l/min
Pressure
140 bar
Speed
3400 rpm
Absorbed power
2.2 kW
Weight
2.5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2233Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2234Plunger kit, Ø12 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2237O-ring kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42122Water seal kit, Ø12 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 42127Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the RMV pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 380410 Screw TCEI M8x403
2 2841730 Head1
6 2840830 Screw1
7 600180 O-ring Ø 7,66x1,781 KIT 2237
8 2841530 Plug3
9 740290 O-ring Ø 14x1,781 KIT 2237
10 2849051 Complete valve6 KIT 2233
11 1470210 O-ring Ø 9x11 KIT 2237
12 2840770 Seat1
13 2840760 Shutter1
14 820510 O-ring Ø 10,82x1,781 KIT 2237
15 2840750 Piston guide1
16 2760210 Ring1
17 660190 O-ring Ø 6,07x1,781 KIT 2237
18 2260100 O-ring Ø 6,02x2,621 KIT 2237
19 2841140 Piston1
20 1060120 Nut1
21 392840 Screw M6x161
22 2760480 Insert1
23 1980220 Wobble plate2
24 2760410 Spring1
25 2200141 Water seal Ø 123 KIT 42122
27 2840561 Bushing3
29 1683500 Oil seal3 KIT 42127
30 2840230 Pump body1
31 480560 O-ring Ø 6,75x1,781
32 2840710 Plug1
33 480480 O-ring Ø 4,48x1,781 KIT 2237
34 3700240 Hose tail Ø 81
35 1250280 Ball1
36 1560520 Spring1
37 1460431 O-ring Ø 4x2,51 KIT 2237
38 3700220 Valve1
39 3700210 Spring1
40 800560 O-ring Ø 8,73x1,782 KIT 2237
41 3700200 Injector1
42 2841220 Fitting1
43 2841230 Fitting1
44 1266330 Filter1
46 2841120 Fitting1
48 2840060 Spring3
49 2840040 Piston Ø 123 KIT 2234
50 2840050 Lock3
51 1980130 Fifth wheel1
52 1980250 Fifth wheel1
53 1980240 Fifth wheel1
54 2840900 Wobble plate1
55 161060 Bearing1
56 161050 Ring2
57 2841050 Ring1 KIT 42127
58 2840890 O-ring Ø 14x22 KIT 2237
59 2840840 Plug1
60 480650 Washer1
61 1060100 Ball1
62 2840440 Seat1
63 2840450 Spring1
65 2841520 O-ring Ø 13,5x1,83 KIT 2237
66 2849288 Head assembly1
67 3700250 O-ring Ø 8x1,11 KIT 2237
68 2761380 Valve1

Motor

Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 2.2 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 90La2 2.22880IEC 90LIE34.6  
RN 90La2 2.22890IEC 90LIE14.7  
RNM 90Lb2 2.22820IEC 90LSingle-phase13.1 at 230 V  
RNM 100a2 2.22880IEC 100Single-phase14 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RNE 90La2, RN 90La2, RNM 90Lb2) No Annovi Reverberi flange listed for this motor.
  • IEC 100, 28 mm shaft (RNM 100a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi RMV pumps

RMV 2 G23 DRMV 2.2 G24 DRMV 2.5 G26 DRMV 2.5 G30 D