PumpLookupPump and motor part numbers
Mains Units

RMW plunger pump

RMW 2 G20 D

Part number 25110

  • 7.6Flow, l/min
  • 140Pressure, bar
  • 3400Speed, rpm
  • 2.2Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi RMW pump

Specification

Flow
7.6 l/min
Pressure
140 bar
Speed
3400 rpm
Absorbed power
2.2 kW
Weight
3 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2233Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2234Plunger kit, Ø12 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2236Oil seal kit 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2237O-ring kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42122Water seal kit, Ø12 mm 

Exploded view

Annovi Reverberi exploded view of the RMW pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 1060120 Nut1
2 392840 Screw M6x161
3 2760480 Insert1
4 1980220 Wobble plate2
5 2760410 Spring1
6 2841140 Piston1
7 2260100 O-ring Ø 6,02x2,621 KIT 2237
8 660190 O-ring Ø 6,07x1,781 KIT 2237
9 2760210 Ring1
10 2840750 Piston guide1
11 740290 O-ring Ø 14x1,782 KIT 2237
12 820510 O-ring Ø 10,82x1,781 KIT 2237
13 2840760 Shutter1
14 2840770 Seat1
15 1470210 O-ring Ø 9x11 KIT 2237
17 3700240 Hose tail Ø 81
18 480480 O-ring Ø 4,48x1,781 KIT 2237
19 1250280 Ball1
20 1560520 Spring1
25 2841530 Plug3
26 2849051 Complete valve6 KIT 2233
27 2841730 Head1
28 2200141 Water seal3 KIT 42122
29 2840561 Bushing3
30 1683500 Oil seal3 KIT 2236
31 2841240 Plug 3/8" G1
32 2840010 Pump body1
33 380410 Screw TCEI M8x403
34 2841220 Fitting1
35 2840250 Fitting1
36 1266330 Filter1
37 1460431 O-ring Ø 4x2,51 KIT 2237
38 3700220 Valve1
39 3700210 Spring1
40 800560 O-ring Ø 8,73x1,782 KIT 2237
41 3700200 Injector1
42 2840260 Fitting1
43 2840060 Spring3
44 2840040 Piston Ø 123 KIT 2234
45 2840050 Lock3
46 1980130 Fifth wheel1
47 1980250 Fifth wheel1
48 1980240 Fifth wheel1
49 2840430 Wobble plate1
50 161060 Bearing1
51 161050 Ring1
52 2840310 Ring1 KIT 2236
55 2840890 O-ring Ø 14x22 KIT 2237
56 2761380 Valve1
57 600180 O-ring Ø 7,66x1,781 KIT 2237
58 2840830 Screw1
65 2841520 O-ring Ø 13,5x1,83 KIT 2237
66 3700250 O-ring Ø 8x1,11
67 480650 Washer1
68 2840840 Plug1
69 1060100 Ball1
70 2840450 Spring1
71 2840440 Seat1
72 2849290 Head assembly1

Motor

Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 2.2 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 90La2 2.22880IEC 90LIE34.6  
RN 90La2 2.22890IEC 90LIE14.7  
RNM 90Lb2 2.22820IEC 90LSingle-phase13.1 at 230 V  
RNM 100a2 2.22880IEC 100Single-phase14 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RNE 90La2, RN 90La2, RNM 90Lb2) No Annovi Reverberi flange listed for this motor.
  • IEC 100, 28 mm shaft (RNM 100a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi RMW pumps

RMW 2 G23 DRMW 2.2 G24 DRMW 2.5 G26 DRMW 2.5 G28 D