RTX-I plunger pump
RTX-I 30.600 N
Part number 29146
- 30Flow, l/min
- 600Pressure, bar
- 1450Speed, rpm
- 34Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 30 l/min
- Pressure
- 600 bar
- Speed
- 1450 rpm
- Absorbed power
- 34 kW
- Weight
- 34 kg
Kits
No kits are listed for this model. A supplier can look them up from the model RTX-I 30.600 N.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model RTX-I 30.600 N and part number 29146.
Motor
A 4-pole motor of at least 34 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200b4 | 37 | 1475 | IEC 200 | IE1 | 71 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 200, 55 mm shaft (RN 200b4) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 200, 55 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 55 mm motor shaft to the pump shaft.