PumpLookupPump and motor part numbers
Mains Units

XTV plunger pump

XTV 2G22 D

Part number 7419

  • 8Flow, l/min
  • 150Pressure, bar
  • 3400Speed, rpm
  • 2.2Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi XTV pump

Specification

Flow
8 l/min
Pressure
150 bar
Speed
3400 rpm
Absorbed power
2.2 kW
Weight
5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 1860Oil seal kit 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 1864Valve kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2520Water seal kit, Ø15 mm 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2628Plunger kit, Ø15 mm 

Exploded view

Annovi Reverberi exploded view of the XTV pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 1322730 Screw TCEI M6x606
2 1381550 Washer6
3 1260162 Plug6
3 1260161 Plug - C=34Nm 1/8”G
4 960160 O-ring Ø 17,86x2,626
5 1269050 Complete valve6 KIT 1864
6 880830 O-ring Ø 15,54x2,626 KIT 1864
8 1262224 Head1
8 1320023 Head1
9 180101 O-ring Ø 17,5x21
10 820361 Plug 1/2" G brass1
11 1980740 Plug 3/8" G brass1
12 740290 O-ring Ø 14x1,782
12 1260140 Ring Ø 153
13 1260141 Ring Ø 153 KIT 2520
13 1520120 Ring Ø 153 KIT 2520
14 1260130 Water seal Ø 153 KIT 2520
15 1260151 Piston guide Ø 153
16 1260420 O-ring Ø 26,70x1,783 KIT 2520
17 1260440 Water seal Ø 153 KIT 2520
18 1260460 Oil seal3 KIT 1860
19 1320010 Pump body1
20 1320330 Bushing1
21 1320370 Bearing1
22 1260790 Ring1
23 1266740 Oil seal1 KIT 1860
24 880130 Plug1
25 1260110 Nut3 KIT 2628
26 1260100 Washer3 KIT 2628
27 1260120 Piston Ø 153 KIT 2628
28 480480 O-ring Ø 4,48x1,783 KIT 2628
29 1260091 Plate3 KIT 2628
30 1260070 Piston3
31 1260080 Pin3
32 1260060 Connecting-rod3
32 1320140 Connecting-rod3
33 1260040 Oil seal1 KIT 1860
34 1260430 Ring1
35 1780690 Plate1
36 1260250 Level gauge1
37 1140450 O-ring Ø 20,24x2,621
38 1329010 Cover1
39 1260760 Screw TCEI M5x206
40 1980740 Plug 3/8" G brass1
41 1263890 Foot2
42 1260470 Screw TE M8x104
43 390430 Screw TE M6x251
44 780230 Washer1
45 1321800 Shaft1
46 1321190 Bearing1
47 1321080 Ring1
48 480671 Oil seal1 KIT 1860
49 1269261 Head assembly1
49 1269209 Head assembly1

Motor

Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 2.2 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 90La2 2.22880IEC 90LIE34.6  
RN 90La2 2.22890IEC 90LIE14.7  
RNM 90Lb2 2.22820IEC 90LSingle-phase13.1 at 230 V  
RNM 100a2 2.22880IEC 100Single-phase14 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RNE 90La2, RN 90La2, RNM 90Lb2) No Annovi Reverberi flange listed for this motor.
  • IEC 100, 28 mm shaft (RNM 100a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi XTV pumps

XTV 3G16 HONDA GX 160K1-QX3 TypeXTV 3G22 D