150 Frame R plunger pump
152R061
- 435.3Flow, l/min
- 138Pressure, bar
- 360Speed, rpm
- 117.47Power, kW
Specification
- Flow
- 435.3 l/min
- Pressure
- 138 bar
- Speed
- 360 rpm
- Absorbed power
- 117.47 kW
- Plunger
- 60.3 mm
- Shaft
- Solid, Ø100 mm
- Weight
- 1400 kg
Kits
Seal kits1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 890036 | Kit, Seal (Includes: 70, 77, 96, 97, 104, 106, 127) |
Valves2
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 2 | 890602 | Key (M28x16x170) | 1 |
| 3 | 891238 | Screw, Grub (M20x20) | 4 |
| 4 | 891275 | Plate, Serial No. | 1 |
| 5 | 891228 | Screw, HH (M20x60) | 10 |
| 8 | 891235 | Cover, Bearing | 1 |
| 10 | 890215 | O-Ring, Bearing Cover - 70D | 2 |
| 11 | 890270 | Seal, Oil | 1 |
| 12 | 890230 | Shim Set | 1 |
| 15 | 891240 | Bearing, Roller | 2 |
| 20 | 891360 | Rod, Connecting | 3 |
| 25 | 891361 | Crankshaft, Single End | 1 |
| 30 | 891230 | Cover, Bearing, Blind | 1 |
| 32 | 891234 | Cap, Filler w/Gasket | 1 |
| 35 | 891226 | Rivet (M2.9x6.5) | 6 |
| 36 | 891202 | Nameplate | 1 |
| 37 | 891233 | Gauge, Oil Bubble w/Gasket | 1 |
| 40 | 890295 | Screw, HH (M16x50) | 10 |
| 42 | 891237 | Washer, Flat (M8) | 6 |
| 43 | 891225 | Screw, HSH (M8x15) | 6 |
| 48 | 891232 | Plug, HH Drain | 1 |
| 50 | 891250 | Cover, Rear | 1 |
| 52 | 891244 | Screw, Grub (M16) | 2 |
| 53 | 891200 | Crankcase | 1 |
| 60 | 891201 | Cover, Rod Box | 1 |
| 61 | 891224 | Screw, HSH (M10x15) | 2 |
| 62 | 891282 | Pin, Roll (M6x25) | 3 |
| 63 | 891280 | Crosshead | 3 |
| 64 | 891281 | Pin, Crosshead | 3 |
| 65 | 891261 | Rod, Plunger | 3 |
| 66 | 891236 | Grommet, Cover | 6 |
| 70 | 890275 | Seal, Oil - 70D | 3 |
| 77 | 890216 | O-Ring, Carrier | 3 |
| 80 | 891255 | Carrier, Oil Seal | 3 |
| 88 | 890347 | Insert, Plunger | 3 |
| 90 | 890415 | Plunger (M60.3x262) | 3 |
| 95 | 890368 | Stud, [M20 x 200] | 3 |
| 96 | 890336 | Back-Up Ring | 3 |
| 97 | 890335 | O-Ring, 70D | 3 |
| 98 | 890348 | Gasket, Plunger Retainer | 3 |
| 99 | 890312 | Retainer, Plunger | 3 |
| 102 | 890372 | Adjuster, Packing | 3 |
| 104 | 890203 | O-Ring, Spacer - 70D | 3 |
| 104 | 890227 | O-Ring, Spacer - 70D | 3 |
| 105 | 890580 | Case, Seal | 3 |
| 106 | 890565 | Seal, LPS | 3 |
| 106 | 890561 | Seal, LPS | 3 |
| 118 | 890389 | Plug, [1/16” NPT(M)] | 3 |
| 124 | 890352 | Housing, Seal | 3 |
| 127 | 890520 | V-Packing, Set | 3 |
| 129 | 890202 | O-Ring, Housing - 70D | 3 |
| 129 | 890228 | O-Ring, Housing - 70D | 3 |
| 130 | 890591 | Back-up-Ring, Housing | 6 |
| 145 | 890589 | Ring, Sealing | 3 |
| 163 | 890201 | O-Ring, Seat - 70D | 6 |
| 163 | 890229 | O-Ring, Seat - 70D | 6 |
| 164 | 890260 | Seat, FV | 6 |
| 166 | 890279 | Valve, FV | 6 |
| 167 | 890428 | Spring | 6 |
| 168 | 890429 | Retainer, Spring | 6 |
| 171 | 890280 | Stud, Valve Guide | 6 |
| 172 | 890217 | O-Ring, Plug - 70D | 6 |
| 172 | 890245 | O-Ring, Plug - 70D | 6 |
| 174 | 890290 | Plug, Valve Inlet | 3 |
| 175 | 890222 | Screw, HSH (M12x55) | 48 |
| 176 | 891290 | Plug, Valve Discharge | 3 |
| 185 | 892012 | Head, Manifold | 1 |
| 188 | 890221 | Screw, HSH (M20x80) | 8 |
| 200 | 892016 | Barb, 1/4” NPT x 1/4” Barb | 6 |
| 201 | 892018 | Hose, 9”x1/4” LOP | 3 |
| 202 | 892019 | Clamp, 1/4” Hose | 6 |
| 290 | 890999 | Loctite® 641, 10ML | 1 |
| 295 | 891102 | Drive-end w/o Plungers | 1 |
| 296 | 890395 | Assembly, Plunger | 3 |
| 297 | 891112 | Assembly, Head | 1 |
| 299 | 892111 | Head, Complete | 1 |
| 300 | 890036 | Kit, Seal | 1 |
| 310 | 893025 | Kit, Valve | 2 |
| 310 | 893026 | Kit, Valve w/o Seat | 2 |
| 349 | 891231 | Screw, HSH (M3x5) | 2 |
| 351 | 890990 | Tool, Packing Adjuster | 1 |
| 352 | 890998 | Clip, Tool | 2 |
| 370 | 998605 | Flushing Assembly, 5 GPM, 10 PSI (152R061C, 152R081C) | 1 |
| 390 | 719500 | C.A.T. (Inlet pressure stabilizer for RO and boosted inlet applications) | 1 |
| 393 | 892092 | Flange, Blank, Inlet (Specify Flange Type When Ordering) | 1 |
| 394 | 892093 | Flange, Blank, Discharge (Specify Flange Type When Ordering) | 1 |
| 395 | 892096 | Flange, Discharge 2” NPT (Specify Flange Type When Ordering) | 1 |
| 396 | 892088 | Flange, Inlet 3” NPT (Specify Flange Type When Ordering) | 1 |
| 890700 | Valve, Relief 2” | 1 | |
| 701557 | Dampener, Pulsation (NBR Bladder) | 1 | |
| 6119 | Lubricant, Antiseize (2 oz.) | 1 | |
| 6116 | Oil, Drum (16 gal.) ISO 100 Multi-viscosity Hydraulic (Fill to specified crankcase capacity prior to start-up) | 1 |
Motor
This pump needs 117.47 kW at 360 rpm, more than the largest motor of that speed listed here.
Flange
The flange depends on the motor, so it is chosen with the motor.
Coupling
The coupling depends on the motor shaft, so it is chosen with the motor.