5CP plunger pump
5CP4118CSS
- 15.9Flow, l/min
- 276Pressure, bar
- 1750Speed, rpm
- 8.6Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 15.9 l/min
- Pressure
- 276 bar
- Speed
- 1750 rpm
- Absorbed power
- 8.6 kW
- Plunger
- 15 mm
- Shaft
- Solid, Ø20 mm
- Weight
- 9 kg
Kits
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 34334 | Kit, Oil Drain ( 3⁄8" x 24") | ||
| 76334 | Kit, Oil Indicator (3/8" x 24") (See Individual Data Sheet) |
Seal kits1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 76979 | Kit, Seal |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 77026 | Kit, Valve Preassembled |
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 2 | 30057 | Key (M6x6x25) | 1 |
| 5 | 126542 | Screw, HHC, Sems (M8x16) | 8 |
| 8 | 46910 | Cover, Bearing | 1 |
| 10 | 14028 | O-Ring, Bearing Cover - 70D | 2 |
| 11 | 43222 | Seal, Oil, Crankshaft - 70D | 1 |
| 15 | 14480 | Bearing, Ball | 2 |
| 20 | 48742 | Rod, Connecting Assy | 3 |
| 25 | 48203 | Crankshaft, Single End (M10) | 1 |
| 25 | 48500 | Crankshaft, Single End (M12) | 1 |
| 25 | 49872 | Crankshaft, Single End (M14) | 1 |
| 25 | 48368 | Crankshaft, Single End (M16.5) | 1 |
| 25 | 48233 | Crankshaft, Single End (M18) | 1 |
| 25 | 49773 | Crankshaft, Single End (M20) | 1 |
| 30 | 49776 | Cover, Bearing | 1 |
| 31 | 127409 | Cap, Vented W/O-Ring (Rain Cap) | 1 |
| 32 | 46798 | Cap, Oil Filler, Domed | 1 |
| 33 | 14179 | O-Ring, Oil Filler Cap - 70D | 1 |
| 37 | 92241 | Gauge, Oil, Bubble w/Gasket - 80D | 2 |
| 38 | 44428 | Gasket, Flat, Oil Gauge - 80D | 2 |
| 40 | 125824 | Screw, HHC, Sems (M6x16) | 4 |
| 48 | 25625 | Plug, Drain (1/4"x19BSP) | 1 |
| 49 | 23170 | O-Ring, Drain Plug - 70D | 1 |
| 50 | 46940 | Cover, Rear | 1 |
| 51 | 14044 | O-Ring, Rear Cover | 1 |
| 53 | 48617 | Crankcase | 1 |
| 64 | 46746 | Pin, Crosshead | 3 |
| 65 | 48458 | Rod, Plunger | 3 |
| 70 | 46838 | Seal, Oil, Crankcase - 70D | 3 |
| 75 | 43900 | Slinger, Barrier | 3 |
| 88 | 45697 | Washer, Keyhole (M18x10) | 3 |
| 90 | 49906 | Plunger (M15 x 41) | 3 |
| 98 | 46730 | Washer, Seal - 90D | 3 |
| 99 | 49907 | Retainer, Plunger w/Stud (M6) | 3 |
| 100 | 46749 | Retainer, Seal | 3 |
| 106 | 49913 | Seal, LPS w/SS-Spg | 3 |
| 120 | 49912 | Case, Seal (Press-in-style) | 3 |
| 121 | 13980 | O-Ring, Seal Case - 70D | 3 |
| 122 | 49944 | Ring, Support | 3 |
| 125 | 49910 | Seal, HPS | 3 |
| 128 | 49990 | Adapter, Male | 3 |
| 139 | 22179 | Plug, Inlet [1/2" NPT(M)] | 1 |
| 160 | 11346 | O-Ring, Inlet Seat - 70D | 3 |
| 161 | 49918 | Seat Inlet | 3 |
| 162 | 49844 | Back-up-Ring, Discharge Seat | 3 |
| 163 | 49845 | O-Ring, Discharge Seat - 70D | 3 |
| 164 | 49917 | Seat, Discharge | 3 |
| 166 | 46429 | Valve | 6 |
| 167 | 43750 | Spring | 6 |
| 168 | 49847 | Retainer, Spring, Inlet | 3 |
| 169 | 44565 | Retainer, Spring, Discharge | 3 |
| 172 | 26089 | O-Ring, Valve Plug - 80D | 3 |
| 174 | 49920 | Plug, Valve | 3 |
| 185 | 49863 | Manifold, Head | 1 |
| 188 | 87868 | Screw, HSH (M8 x 107) | 8 |
| 196 | 22187 | Plug, Discharge [3/8" NPT(M)] | 1 |
| 255 | 30243 | Mount, Direct | 1 |
| 260 | 30611 | Mount, Rail, Assy (4.22") Standard | 1 |
| 260 | 30613 | Mount, Rail,Assy (5.02") | 1 |
| 260 | 76513 | Mount, Rail,Assy (5.52") | 1 |
| 275 | 30944 | Assembly, “H” Hub & Key | 1 |
| 283 | 76334 | Kit, Oil Indicator (3/8" x 24") (See Individual Data Sheet) | 1 |
| 283 | 34334 | Kit, Oil Drain (3/8" x 24") (See Individual Data Sheet) | 1 |
| 299 | 818584 | Head, Complete w/ NBR Seals and O-Rings | 1 |
| 300 | 76979 | Kit, Seal | 1 |
| 310 | 77026 | Kit, Valve Preassembled | 1 |
| 6107 | Oil, Bottle (21 oz.) ISO 68 Hydraulic (Fill to specified crankcase capacity prior to start-up) | 1 |
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 8.6 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160Ma4 | 11 | 1475 | IEC 160M | IE3 | 22.4 | |
| RN 160Ma4 | 11 | 1450 | IEC 160M | IE1 | 22.4 | |
| RN 132Mb4 uprated | 9.2 | 1440 | IEC 132M | IE1 | 19.2 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Mb4) No Cat Pumps flange listed for this motor.
- IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Cat Pumps flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft No Cat Pumps coupling listed: you need one for a 38 mm motor shaft to 20 mm pump shaft.
- IEC 160, 42 mm motor shaft No Cat Pumps coupling listed: you need one for a 42 mm motor shaft to 20 mm pump shaft.
Other Cat Pumps 5CP pumps
5CP2120B5CP2120W5CP2140BCS5CP2140WCS5CP2150B5CP2150W5CP3105CSS5CP3110CSS5CP31205CP3120CSS5CP3120CSSG15CP3150CSS5CP3150CSSG15CP3160CSS5CP3160CSSG15CP4110CSS5CP4112CSS5CP4114CSS5CP4116CSS5CP4120CSS5CP51205CP5120CSS5CP5135CSS5CP5135CSSG15CP51405CP5140CSS5CP5140CSSG15CP5140CSSG1185CP61205CP6120CS5CP6120CSSG15CP6180CSS5CP6180CSSG15CP61905CP6190G1