PumpLookupPump and motor part numbers
Mains Units

5CP plunger pump

5CP6190

  • 37.9Flow, l/min
  • 83Pressure, bar
  • 1750Speed, rpm
  • 6.1Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Cat Pumps 5CP pump

Specification

Flow
37.9 l/min
Pressure
83 bar
Speed
1750 rpm
Absorbed power
6.1 kW
Plunger
22 mm
Shaft
Solid, Ø20 mm
Weight
9.3 kg

Data sheet (PDF, Cat Pumps)

Kits

Valves3

Part numberDescriptionPer pumpSuppliers
31253Valve kit, EPDM (.0220)2 
31256Valve kit, FPM (.0110)2 
34920Valve kit, NBR (STD)2 

Seal kits4

Part numberDescriptionPer pumpSuppliers
76610Seal kit, FPM (.0110)1 
76616Seal kit, HT (.3000)1 
76620Seal kit, NBR (STD)1 
76650Seal kit, EPDM (.0220)1 

Exploded view

Cat Pumps exploded view of the 5CP pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 126542 Screw, HHC, Sems (M8 x 16)8
8 46910 Cover, Bearing2
10 14028 O-Ring, Cover Bearing2
11 43222 Seal, Oil, Crankshaft2
15 14480 Bearing, Ball2
20 48742 Assembly, Connecting Rod3
25 48646 Crankshaft, Dual-End (M20) (Models: 5CP6190, 5CP6190G1)1
25 48368 Crankshaft, Single-End (M16.5) (Models: 5CP6180CSS, 5CP6180CSSG1)1
32 46798 Cap, Oil Filler, Domed1
33 14179 O-Ring, Oil Filler Cap1
37 92241 Gauge, Oil, Bubble with Gasket1
38 44428 Gasket, Flat, Oil Gauge1
40 125824 Screw, HHC, Sems (M6 x 16)4
48 25625 Plug, Drain (1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug1
50 46940 Cover, Rear1
51 14044 O-Ring, Rear Cover1
53 48617 Crankcase1
64 46746 Pin, Crosshead3
65 48647 Rod, Plunger3
70 46838 Seal, Oil, Crankcase3
87 48648 Washer, Flat (M10 x 24)3
90 121391 Plunger (M22 x 50)3
98 46730 Washer, Seal3
99 48201 Retainer, Plunger with Stud (M6)3
100 46749 Retainer, Seal3
106 49644 Seal, Low-Pressure with SS-Spring3
120 121394 Case, Seal3
121 13980 O-Ring, Seal Case3
125 121395 Seal, High-Pressure with S-Support3
162 43248 Backup Ring, Seat6
163 43249 O-Ring, Seat6
164 44718 Seat6
166 43721 Valve6
167 43751 Spring6
168 44564 Retainer, Spring6
172 17617 O-Ring, Valve Plug6
174 125214 Plug, Valve6
185 49760 Manifold, Head1
188 126513 Screw, HSH (M8 x 70)8
500 8076 Gearbox (See Individual Data Sheet)1

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 6.1 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 132Ma4 7.51465IEC 132MIE315.3  
RN 132Ma4 7.51440IEC 132MIE115.3  
RN 112c4 uprated 6.31420IEC 112IE112.5  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 112, 28 mm shaft (RN 112c4) No Cat Pumps flange listed for this motor.
  • IEC 132, 38 mm shaft (RNE 132Ma4, RN 132Ma4) No Cat Pumps flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 112, 28 mm motor shaft No Cat Pumps coupling listed: you need one for a 28 mm motor shaft to 20 mm pump shaft.
  • IEC 132, 38 mm motor shaft No Cat Pumps coupling listed: you need one for a 38 mm motor shaft to 20 mm pump shaft.

Other Cat Pumps 5CP pumps

5CP2120B5CP2120W5CP2140BCS5CP2140WCS5CP2150B5CP2150W5CP3105CSS5CP3110CSS5CP31205CP3120CSS5CP3120CSSG15CP3150CSS5CP3150CSSG15CP3160CSS5CP3160CSSG15CP4110CSS5CP4112CSS5CP4114CSS5CP4116CSS5CP4118CSS5CP4120CSS5CP51205CP5120CSS5CP5135CSS5CP5135CSSG15CP51405CP5140CSS5CP5140CSSG15CP5140CSSG1185CP61205CP6120CS5CP6120CSSG15CP6180CSS5CP6180CSSG15CP6190G1