Plunger pumps plunger pump
67DX39G1I
- 14.8Flow, l/min
- 276Pressure, bar
- 3450Speed, rpm
- 7.97Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 14.8 l/min
- Pressure
- 276 bar
- Speed
- 3450 rpm
- Absorbed power
- 7.97 kW
- Plunger
- 14 mm
- Shaft
- Hollow
- Weight
- 7.7 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 76260 | Kit, Valve Pre-Assembled (Includes: 160-164, 166, 167, 168, 169, 172) |
Seal kits1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 76262 | Kit, Seal (Includes: 98, 106, 121, 127, 128) |
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 5 | 127285 | Screw, HH, Sems (M8 x 25) | 4 |
| 8 | 49361 | Cover, Adapter Bearing | 1 |
| 10 | 14043 | O-Ring, Bearing Cover | 1 |
| 11 | 125351 | Seal, Oil Crankshaft | 1 |
| 15 | 146421 | Bearing, Ball, Inner | 1 |
| 20 | 49364 | Rod, Connecting | 3 |
| 24 | 549608 | Plug, Oil Cap | 1 |
| 25 | 49391 | Crankshaft (M10.3) | 1 |
| 27 | 49363 | Bearing, Ball, Outer | 1 |
| 31 | 549726 | Cap, Vented with O-Ring (Rain Cap) | 1 |
| 32 | 547961 | Cap, Oil Filler with O-Ring | 1 |
| 33 | 14179 | O-Ring, Filler Cap-70D | 1 |
| 37 | 92241 | Gauge, Oil Bubble with Gasket-80D | 1 |
| 38 | 44428 | Gasket, Flat, Oil Gauge-80D | 1 |
| 48 | 44842 | Plug, Drain | 1 |
| 49 | 14179 | O-Ring, Drain Plug-70D | 1 |
| 53 | 49352 | Crankcase | 1 |
| 64 | 49366 | Pin, Crosshead | 3 |
| 65 | 49368 | Rod, Plunger | 3 |
| 70 | 47215 | Seal, Oil Crankcase | 3 |
| 75 | 49370 | Slinger, Barrier | 3 |
| 90 | 49367 | Plunger (M14 x 28) | 3 |
| 98 | 46730 | Washer, Seal-90D | 3 |
| 99 | 49369 | Retainer, Plunger | 3 |
| 100 | 49371 | Retainer, Seal | |
| 106 | 45188 | Seal, Low-Pressure with S-Spring | 3 |
| 120 | 49374 | Case, Seal | 3 |
| 121 | 13977 | O-Ring, Seal Case-70D | 3 |
| 127 | 49606 | V-Packing (Black) | 3 |
| 128 | 49605 | Adapter, Male | 3 |
| 160 | 26129 | O-Ring, Inlet Valve Seat-70D | 3 |
| 161 | 49378 | Seat, Inlet | 3 |
| 162 | 48361 | Backup Ring, Discharge Seat | 3 |
| 163 | 43358 | O-Ring, Discharge Seat-70D | 3 |
| 164 | 49376 | Seat, Discharge | 3 |
| 166 | 547098 | Valve | 6 |
| 167 | 49354 | Spring | 6 |
| 168 | 49377 | Retainer, Spring, Inlet | 3 |
| 169 | 547441 | Retainer, Spring, Discharge | 3 |
| 172 | 49382 | O-Ring, Valve Plug-90D | 3 |
| 174 | 49380 | Plug, Valve | 3 |
| 185 | 49372 | Head, Manifold | 1 |
| 188 | 126512 | Screw, HSH (M8 x 65) | 8 |
| 197 | 941517 | Assembly, GH (1/2" NPT[M] x 3/4" GH[F]) | 1 |
| 255 | 31445 | Assembly, Bolt Mount, Gas | 1 |
| 300 | 76262 | Kit, Seal (Includes: 98, 106, 121, 127, 128) | 1 |
| 310 | 76260 | Kit, Valve Pre-Assembled (Includes: 160-164, 166, 167, 168, 169, 172) | 1 |
| 460 | 126974 | Fitting, Discharge (3/8" NPT[M]) | 1 |
| 469 | 7367 | Injector, Chemical Fixed | 1 |
Motor
This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 7.97 kW.
Flange
None needed: the pump fits straight onto a hollow-shaft motor.
Coupling
None needed: the pump fits straight onto a hollow-shaft motor.