7 Frame plunger pump
700G1
- 17Flow, l/min
- 345Pressure, bar
- 3465Speed, rpm
- 11.49Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 17 l/min
- Pressure
- 345 bar
- Speed
- 3465 rpm
- Absorbed power
- 11.49 kW
- Plunger
- 14 mm
- Shaft
- Hollow
- Weight
- 12.8 kg
Kits
Seal kits3
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 76032 | Seal kit, FPM (.0110) | 1 | |
| 76079 | Seal kit, NBR (STD) | 1 | |
| 76578 | Seal kit, NBR (.3400) | 1 |
Valves2
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 5 | 125824 | Screw, HHC Sems (M6 x 16) | |
| 8 | 133571 | Cover, Bearing | 1 |
| 9 | 815280 | Shim, Split, 2-Piece | 2 |
| 10 | 12393 | O-Ring, Bearing Cover | |
| 11 | 43222 | Seal, Oil, Crankshaft | |
| 15 | 43221 | Bearing, Roller | 2 |
| 20 | 48863 | Rod, Connecting | 3 |
| 25 | 119234 | Crankshaft, Single-End (M24 with 60 mm Extension) | 1 |
| 25 | 46554 | Crankshaft, Single-End (M24 with 34 mm Extension) | 1 |
| 30 | 133572 | Cover, Blind Bearing | 1 |
| 32 | 44666 | Cap, Oil Filler, Domed | 1 |
| 33 | 14177 | O-Ring, Oil Filler Cap-70D | 1 |
| 37 | 92241 | Gauge, Oil, Bubble with Gasket-80D | 1 |
| 38 | 44428 | Gasket, Flat, Oil Gauge-80D | 1 |
| 40 | 125824 | Screw, HHC Sems (M6 x 16) | 4 |
| 48 | 25625 | Plug, Drain (1/4" x 19 BSP) | 1 |
| 49 | 23170 | O-Ring, Drain Plug-70D | 1 |
| 50 | 133569 | Cover, Rear | 1 |
| 51 | 14047 | O-Ring, Rear Cover-70D | 1 |
| 53 | 133593 | Crankcase with Guide Pins | 1 |
| 54 | 27488 | Pin, Guide | 2 |
| 56 | 43240 | Pan, Oil | 1 |
| 64 | 43237 | Pin, Crosshead | 3 |
| 65 | 49892 | Rod, Plunger | 3 |
| 69 | 126589 | Washer, Oil Seal | 3 |
| 70 | 43228 | Seal, Oil, Crankcase | 3 |
| 75 | 43328 | Slinger, Barrier | 3 |
| 88 | 45697 | Washer, Keyhole (M18 x 10) | 3 |
| 90 | 45890 | Plunger (M14 x 72) | 3 |
| 95 | 126558 | Stud, Plunger Retainer (M6 x 64.5) | 3 |
| 96 | 43235 | Backup Ring, Plunger Retainer | 3 |
| 97 | 17399 | O-Ring, Plunger Retainer - 80D | 3 |
| 98 | 45891 | Gasket, Plunger Retainer | 3 |
| 99 | 46504 | Retainer, Plunger (M6) | 3 |
| 100 | 45689 | Retainer, Seal, 2-Piece | 3 |
| 101 | 43571 | Wick, Long Tab | 3 |
| 106 | 45188 | Seal, Low-Pressure with S-Spring | 3 |
| 110 | 49797 | Manifold, Inlet | 1 |
| 112 | 11343 | O-Ring, Inlet Manifold-70D | 3 |
| 117 | 49679 | Screw, HSH (M10 x 35) | 4 |
| 118 | 49680 | Washer | 4 |
| 121 | 14200 | O-Ring, V-Packing Spacer-70D | 3 |
| 122 | 49840 | Backup Ring, V-Packing Spacer | 3 |
| 123 | 49839 | O-Ring, V-Packing Spacer-90D | 3 |
| 124 | 49838 | Spacer, V-Packing | 3 |
| 126 | 45896 | Adapter, Female | 3 |
| 127 | 45895 | V-Packing | 9 |
| 128 | 46567 | Adapter, Male | 3 |
| 159 | 49861 | Backup Ring, Inlet Valve Seat | 3 |
| 160 | 11346 | O-Ring, Inlet Valve Seat-70D | 3 |
| 161 | 49846 | Seat, Inlet | 3 |
| 162 | 49844 | Backup Ring, Discharge Valve Seat | 3 |
| 163 | 49845 | O-Ring, Discharge Valve Seat-70D | 3 |
| 164 | 49843 | Seat, Discharge | 3 |
| 165 | 49847 | Retainer, Spring, Inlet | 3 |
| 166 | 46562 | Valve | 6 |
| 167 | 43750 | Spring | 6 |
| 168 | 44565 | Retainer, Spring, Discharge | 3 |
| 172 | 49382 | O-Ring, Valve Plug-90D | 3 |
| 173 | 49850 | Backup Ring, Valve Plug | 3 |
| 174 | 49849 | Plug, Valve | 3 |
| 185 | 49798 | Head, Manifold | 1 |
| 188 | 49852 | Screw, HSH (M10 x 65) | 8 |
| 500 | 8071 | Gearbox, 1" (See 8071 Data Sheet) | 1 |
Motor
This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 11.49 kW.
Flange
None needed: the pump fits straight onto a hollow-shaft motor.
Coupling
None needed: the pump fits straight onto a hollow-shaft motor.
Other Cat Pumps 7 Frame pumps
5656G156G11856HSG156HSG118576060G160G118530550700740740G1760760G1