7CP plunger pump
7CP6160CSG118
- 38Flow, l/min
- 172Pressure, bar
- 3400Speed, rpm
- 12.77Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 38 l/min
- Pressure
- 172 bar
- Speed
- 3400 rpm
- Absorbed power
- 12.77 kW
- Plunger
- 20 mm
- Shaft
- Hollow
- Weight
- 14 kg
Kits
Seal kits1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 77052 | Seal kit, NBR (STD) | 1 |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 77053 | Valve kit, NBR (STD) | 2 |
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 5 | 126540 | Screw, HHC Sems (M8 x 20) | 8 |
| 8 | 131405 | Cover, Bearing | 1 |
| 9 | 49503 | Shim, Split, 2-Piece, Outer | 0 |
| 10 | 12393 | O-Ring, Bearing Cover-70D | 2 |
| 11 | 49190 | Seal, Oil Crankshaft | 1 |
| 12 | 49504 | Shim, Split, 2-Piece, Inner | 0 |
| 15 | 63479 | Bearing, Roller | 2 |
| 20 | 48727 | Rod, Connecting Assembly | 3 |
| 25 | 49649 | Crankshaft, Single-End (M26) | 1 |
| 30 | 131407 | Cover, Blind Bearing | 1 |
| 32 | 44666 | Cap, Oil Filler | 1 |
| 33 | 14177 | O-Ring, Oil Filler Cap-70D | 1 |
| 36 | 129343 | Gasket, Flat | 1 |
| 37 | 92241 | Gauge, Oil, Bubble with Gasket-80D | 1 |
| 38 | 44428 | Gasket, Flat, Oil Gauge-80D | 1 |
| 39 | 49948 | Dip Stick | 1 |
| 40 | 125824 | Screw, HHC Sems (M6 x 16) | 4 |
| 48 | 25625 | Plug, Drain ( 1/4" x 19 BSP) | 1 |
| 49 | 23170 | O-Ring, Drain Plug-70D | 1 |
| 50 | 131403 | Cover, Rear | 1 |
| 51 | 14030 | O-Ring, Rear Cover-70D | 1 |
| 53 | 131400 | Crankcase | 1 |
| 64 | 46969 | Pin, Crosshead | 3 |
| 65 | 46968 | Rod, Plunger | 3 |
| 70 | 48281 | Seal, Oil Crankcase | 3 |
| 75 | 43328 | Slinger, Barrier | 3 |
| 90 | 134938 | Plunger, Ceramic (M20 x 53) | 3 |
| 98 | 46730 | Washer, Seal-90D | 3 |
| 99 | 46729 | Retainer, Plunger (M6) | 3 |
| 100 | 46964 | Retainer, Seal | 3 |
| 106 | 43305 | Seal, Low-Pressure with S-Spring | 3 |
| 120 | 134941 | Case, Seal | 3 |
| 121 | 13982 | O-Ring, Seal Case-70D | 3 |
| 127 | 45191 | V-Packing | 6 |
| 128 | 134942 | Adapter, Male | 3 |
| 162 | 43248 | Backup Ring, Seat | 6 |
| 163 | 43249 | O-Ring, Seat-80D | 6 |
| 164 | 49696 | Seat | 6 |
| 166 | 43721 | Valve | 6 |
| 167 | 43251 | Spring | 6 |
| 168 | 44564 | Retainer, Spring | 6 |
| 172 | 17617 | O-Ring, Valve Plug-90D | 6 |
| 174 | 43850 | Plug, Valve | 6 |
| 185 | 134940 | Head, Manifold | 1 |
| 188 | 126513 | Screw, HSH (M8 x 70) | 8 |
| 500 | 8081 | Gearbox, 1" Shaft (See Individual Data Sheet) | 1 |
| 500 | 8072 | Gearbox, 11⁄8" Shaft (See Individual Data Sheet) | 1 |
Motor
This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 12.77 kW.
Flange
None needed: the pump fits straight onto a hollow-shaft motor.
Coupling
None needed: the pump fits straight onto a hollow-shaft motor.
Other Cat Pumps 7CP pumps
7CP6110CS7CP6110CSG17CP6111CS7CP6111CSG17CP6160CS7CP6160CSG17CP6165CSG17CP6165CSG1187CP61707CP6170G17CP6171CS7CP6185CS