PumpLookupPump and motor part numbers
Mains Units

HFR plunger pump

HFR60FR

Part number 1.099-190.0

  • 60Flow, l/min
  • 280Pressure, bar
  • 1450Speed, rpm
  • 31.6Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Hawk HFR pump

Specification

Flow
60 l/min
Pressure
280 bar
Speed
1450 rpm
Absorbed power
31.6 kW
Max water temperature
40 °C
Shaft side
Right
Shaft
Solid
Inlet
1 - 1 1/4" G
Outlet
G 3/4
Weight
49 kg
Oil
3.5 litres

Kits

Ordinary maintenance2

Part numberDescriptionPer pumpSuppliers
1.099-807.0Plunger seals Ø30 mm1 
1.905-704.0Complete valve1 

Extraordinary maintenance5

Part numberDescriptionPer pumpSuppliers
1.099-813.0Plunger Ø30 mm3 
1.099-817.0Plunger oil seal kit1 
1.099-818.0Complete manifold 301 
1.905-702.0Complete seals packing Ø30 mm1 
1.905-706.0Crankcase seal kit1 

Tools1

Part numberDescriptionPer pumpSuppliers
1.904-204.0Tool-kit1 

Exploded view

Hawk exploded view of the HFR pump, with position numbers
Hawk's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 9.851-902.0 Crankcase1
2 Kit only Plunger oil seal3 1.099-817.0
3 Kit only Plastic bushing3 1.099-817.0
4 Kit only O-ring Ø2.62 x 56,823 1.099-807.0, 1.099-818.0, 1.905-702.0
5 Kit only Pressure ring 30 mm3 1.099-818.0, 1.905-702.0
6 Kit only "vb" seal Ø30 x 453 1.099-807.0, 1.099-818.0, 1.905-702.0
7 Kit only Intermediate ring 30 mm3 1.099-818.0, 1.905-702.0
8 Kit only Back ring Ø303 1.099-807.0, 1.099-818.0, 1.905-702.0
9 Kit only “v” seal Ø30 x 456 1.099-807.0, 1.099-818.0, 1.905-702.0
10 Kit only Support ring Ø303 1.099-818.0, 1.905-702.0
11 Kit only Copper washer1 1.099-818.0
12 Kit only Brass plug G1”1 1.099-818.0
13 Kit only Manifold housing Ø301 1.099-818.0
14 Kit only Valve assembly6 1.099-818.0, 1.905-704.0
15 Kit only O-ring Ø2.62 x 31,426 1.099-818.0, 1.905-704.0
16 Kit only Back ring6 1.099-818.0, 1.905-704.0
17 Kit only Valve plug6 1.099-818.0
18 Kit only Valves cover2 1.099-818.0
19 Kit only Valve cover screw12 1.099-818.0
20 Kit only Valve plug screw6 1.099-818.0
21 9.851-471.0 Manifold stud bolt
22 9.851-472.0 Manifold stud bolt4
23 Kit only Copper washer1 1.099-818.0
24 Kit only Inox plug G3/41 1.099-818.0
25 Kit only O-ring Ø2.62 x 28.256 1.099-818.0, 1.905-704.0
26 Kit only Back ring6 1.099-818.0, 1.905-704.0
27 Kit only Valve seat6 1.099-818.0, 1.905-704.0
28 Kit only Valve plate6 1.099-818.0, 1.905-704.0
29 Kit only Valve spring6 1.099-818.0, 1.905-704.0
30 Kit only Valve cage6 1.099-818.0, 1.905-704.0
31 9.851-468.0 Bearing housing screw12
32 9.850-646.0 Closed bearing screw1
33 Kit only O-ring Ø2.62 x 120.322 1.905-706.0
34 9.850-353.0 Roller bearing2
35 9.850-184.0 Single - ended shaft1
36 9.850-449.0 Crankshaft KIT1
37 9.851-454.0 Eyebolt1
38 Kit only Crankshaft seal1 1.905-706.0
39 9.850-645.0 Bearing housing1
40 Kit only Plunger bolt3 1.099-813.0
41 Kit only O-ring Ø1.78 x 11.113 1.099-813.0
42 Kit only Plunger Ø303 1.099-813.0

Motor

A 4-pole motor of at least 31.6 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 200b4 371475IEC 200IE171  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 200, 55 mm shaft (RN 200b4) No Hawk flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 200, 55 mm motor shaft No Hawk coupling listed: you need one for a 55 mm motor shaft to the pump shaft.

Other Hawk HFR pumps

HFR40FHFR40SHFR60FLHFR60SLHFR60SRHFR80FLHFR80FRHFR80SHFR105SLHFR105SRHFR120SLHFR120SRHFR8020SLHFR8020SR