PumpLookupPump and motor part numbers
Mains Units

XLTI Stainless Steel Chemical plunger pump

XLT3515ESAR

Part number 1.904-814.0

  • 35Flow, l/min
  • 150Pressure, bar
  • 1450Speed, rpm
  • 10.1Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Hawk XLTI Stainless Steel Chemical pump

Specification

Flow
35 l/min
Pressure
150 bar
Speed
1450 rpm
Absorbed power
10.1 kW
Max water temperature
85 °C
Shaft side
Right
Shaft
Solid
Inlet
G 1
Outlet
G 1/2
Weight
19.5 kg
Oil
1.2 litres

Kits

Service kits10

Part numberDescriptionPer pumpSuppliers
1.099-665.0Tool-kit1 
1.904-464.0Plunger seal kit, 25 mm1 
1.904-466.0Plunger, 25 mm3 
1.905-395.0Complete valve kit1 
1.905-396.0Complete manifold1 
1.905-545.0Plunger oil seal kit1 
1.905-613.0Crankcase seal kit1 
1.905-659.0Seal extractor tool-kit1 
1.905-694.0Complete seal packing, 25 mm1 
1.905-715.0Connecting rod and plunger rod assembly3 

Parts list

The parts that come in this pump's service kits, by Hawk part number.

Part numberDescriptionQty in kitKit
In kitPlug G3/81.905-613.0
In kitO-ring Ø1.78 x 71.121.905-613.0
In kitCrankshaft seal1.905-613.0
In kitO-ring Ø2.62 x 152.071.905-613.0
In kitO-ring Ø1.78 x 141.905-613.0
In kitSight glass, G3/41.905-613.0
In kitPlunger oil seal1.905-545.0
In kitO-ring Ø1.78 x 37.82 FKM1.904-464.0
In kitLow pressure "U" seal Ø25 mm1.904-464.0
In kitHigh pressure "U" seal Ø25 mm1.904-464.0
In kitO-ring Ø1.78 x 37.82 FKM1.905-694.0
In kitStainless steel pressure ring 25 mm1.905-694.0
In kitLow pressure "U" seal Ø25 mm1.905-694.0
In kitStainless steel intermediate ring 25 mm1.905-694.0
In kitHigh pressure "U" seal Ø25 mm1.905-694.0
In kitPlunger bolt1.904-466.0
In kitStainless steel bonded seal1.904-466.0
In kitPlunger 25 mm1.904-466.0
In kitStainless steel spacer1.904-466.0
In kitPlunger bolt1.905-715.0
In kitStainless steel bonded seal1.905-715.0
In kitPlunger rod1.905-715.0
In kitConnecting rod1.905-715.0
In kitConnecting rod pin1.905-715.0
In kitSpring washer Ø81.905-715.0
In kitConnecting rod screw M8 x 351.905-715.0
In kitValve assembly1.905-395.0
In kitO-ring 3075 Ø2,62 x 18,72 EPDM 90 sha1.905-395.0
In kitStainlees steel valve seat1.905-395.0
In kitStainless stell valve plate1.905-395.0
In kitStainless steel stem1.905-395.0
In kitStainless stell valve spring1.905-395.0
In kitO-ring 3075 Ø2,62 x 21,89 EPDM 801.905-395.0
In kitStainless steel valve plug1.905-395.0
In kitO-ring Ø1.78 x 37.82 EPDM1.905-396.0
In kitStainless steel pressure ring 25 mm1.905-396.0
In kitLow pressure "U" seal Ø25 mm1.905-396.0
In kitStainless intermediate ring 25 mm1.905-396.0
In kitHigh pressure "U" seal Ø25 mm1.905-396.0
In kitStainless steel bonded seal G 3/41.905-396.0
In kitStainless steel plug G 3/41.905-396.0
In kitStainless steel manifold housing1.905-396.0
In kitValve assembly1.905-396.0
In kitStainless steel lock washer Ø10,21.905-396.0
In kitStainless steel manifold stud bolt M10 x 801.905-396.0
In kitO-ring 3075 Ø2,62 x 18,72 EPDM 90 sha1.905-396.0
In kitStainlees steel valve seat1.905-396.0
In kitStainless stell valve plate1.905-396.0
In kitStainless steel stem1.905-396.0
In kitStainless stell valve spring1.905-396.0
In kitO-ring 3075 Ø2,62 x 21,89 EPDM 801.905-396.0
In kitStainless steel valve plug1.905-396.0

Motor

A 4-pole motor of at least 10.1 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160Ma4 111475IEC 160MIE322.4  
RN 160Ma4 111450IEC 160MIE122.4  
RN 132Mc4 uprated 111430IEC 132MIE124  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

Other Hawk XLTI Stainless Steel Chemical pumps

XLT2515ESALXLT2515ESARXLT2520ESAXLT3015ESALXLT3015ESARXLT3020ESAXLT3515ESALXLT3520ESAXLT4015ESALXLT4015ESARXLT4020ESAXLT5015ESALXLT5015ESARXLT5020ESAXLT5620ESA