XLTI Stainless Steel Chemical plunger pump
XLT5020ESA
- 50Flow, l/min
- 200Pressure, bar
- 1450Speed, rpm
- 18.6Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 50 l/min (60 l/min at 60 Hz)
- Pressure
- 200 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 18.6 kW (22.4 kW at 60 Hz)
- Shaft
- Solid
Kits
Ordinary maintenance2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.904-464.0 | Plunger seal kit, 25 mm | 1 | |
| 1.905-395.0 | Complete valve kit | 1 |
Extraordinary maintenance6
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.904-466.0 | Plunger, 25 mm | 3 | |
| 1.905-396.0 | Complete manifold | 1 | |
| 1.905-545.0 | Plunger oil seal kit | 1 | |
| 1.905-613.0 | Crankcase seal kit | 1 | |
| 1.905-694.0 | Complete seal packing, 25 mm | 1 | |
| 1.905-715.0 | Connecting rod and plunger rod assembly | 3 |
Tools2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-665.0 | Tool-kit | 1 | |
| 1.905-659.0 | Seal extractor tool-kit | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 9.853-797.0 | Red crankcase | 1 | |
| 2 | Kit only | Plunger oil seal FKM | 3 | 1.905-545.0 |
| 3 | Kit only | O-ring Ø1.78 x 37.82 EPDM | 3 | 1.904-464.0, 1.905-396.0, 1.905-694.0 |
| 4 | Kit only | Stainless steel pressure ring 25 mm | 3 | 1.905-396.0, 1.905-694.0 |
| 5 | Kit only | Low pressure "U" seal Ø25 mm | 3 | 1.904-464.0, 1.905-396.0, 1.905-694.0 |
| 6 | Kit only | Stainless intermediate ring 25 mm | 3 | 1.905-396.0, 1.905-694.0 |
| 7 | Kit only | High pressure "U" seal Ø25 mm | 3 | 1.904-464.0, 1.905-396.0, 1.905-694.0 |
| 8 | Kit only | Stainless steel bonded seal G 3/4 | 1 | 1.905-396.0 |
| 9 | Kit only | Stainless steel plug G 3/4 | 1 | 1.905-396.0 |
| 10 | Kit only | Stainless steel manifold housing | 1 | 1.905-396.0 |
| 11 | Kit only | Valve assembly | 6 | 1.905-395.0, 1.905-396.0 |
| 12 | Kit only | O-ring 3075 Ø2,62 x 18,72 EPDM 90 sha | 6 | 1.905-395.0, 1.905-396.0 |
| 13 | Kit only | Stainlees steel valve seat | 6 | 1.905-395.0, 1.905-396.0 |
| 14 | Kit only | Stainless stell valve plate | 6 | 1.905-395.0, 1.905-396.0 |
| 15 | Kit only | Stainless steel stem | 6 | 1.905-395.0, 1.905-396.0 |
| 16 | Kit only | Stainless stell valve spring | 6 | 1.905-395.0, 1.905-396.0 |
| 17 | Kit only | O-ring 3075 Ø2,62 x 21,89 EPDM 80 | 6 | 1.905-395.0, 1.905-396.0 |
| 18 | Kit only | Stainless steel valve plug | 6 | 1.905-395.0, 1.905-396.0 |
| 19 | Kit only | Stainless steel lock washer Ø10,2 | 8 | 1.905-396.0 |
| 20 | Kit only | Stainless steel manifold stud bolt M10 x 80 | 8 | 1.905-396.0 |
| 21 | Kit only | Stainless steel bonded seal G 1/2 | 1 | 1.905-396.0 |
| 22 | Kit only | Stainless steel plug G 1/2 | 1 | 1.905-396.0 |
| 23 | 9.851-476.0 | Stainless steel screw M8 x 20 | 8 | |
| 24 | 9.851-133.0 | Stainless steel washer Ø8,5 | 8 | |
| 25 | 9.853-799.0 | Red closed bearing housing | 1 | |
| 26 | Kit only | O-ring Ø2.62 x 71.12 NBR | 2 | 1.905-613.0 |
| 27 | 9.850-347.0 | Roller bearing 33206 | 2 | |
| 28 | 9.853-816.0 | Single - ended shaft 11.8 mm | 1 | |
| 29 | 9.850-447.0 | Crankshaft key | 1 | |
| 30 | 9.851-287.0 | Oil dip stick | 1 | |
| 31 | Kit only | Crankshaft seal NBR | 1 | 1.905-613.0 |
| 32 | 9.853-798.0 | Red bearing housing | 1 | |
| 33 | Kit only | Plunger bolt | 3 | 1.904-466.0, 1.905-715.0 |
| 34 | Kit only | Stainless steel plunger bonded seal | 3 | 1.904-466.0, 1.905-715.0 |
| 35 | Kit only | Plunger 25 mm | 3 | 1.904-466.0 |
| 36 | Kit only | Stainless steel spacer | 3 | 1.904-466.0 |
| 37 | Kit only | Plunger rod | 3 | 1.905-715.0 |
| 38 | Kit only | Connecting rod pin | 3 | 1.905-715.0 |
| 39 | Kit only | Connecting rod | 3 | 1.905-715.0 |
| 40 | Kit only | Spring washer Ø8 | 6 | 1.905-715.0 |
| 41 | Kit only | Connecting rod screw M8 x 35 | 6 | 1.905-715.0 |
| 42 | Kit only | O-ring Ø2.62 x 152.07 NBR | 1 | 1.905-613.0 |
| 43 | 9.851-475.0 | Cover screw stainless steel | 5 | |
| 44 | 9.853-800.0 | Red crankcase cover | 1 | |
| 45 | Kit only | Sight glass, G3/4 | 1 | 1.905-613.0 |
| 46 | Kit only | Brass plug G3/8 | 1 | 1.905-613.0 |
| 47 | Kit only | O-ring Ø1.78 x 14 NBR | 1 | 1.905-613.0 |
Motor
A 4-pole motor of at least 18.6 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm, where it takes 22.4 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 180La4 | 22 | 1465 | IEC 180L | IE1 | 42 | |
| RN 160Lc4 uprated | 22 | 1450 | IEC 160L | IE1 | 42 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RN 160Lc4) 1.099-532.0 Motor flange, IEC 160 B5
- IEC 180, 48 mm shaft (RN 180La4) No Hawk flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft 1.905-890.0 Flexible coupling, IEC 160, 42 mm motor to 24 mm pump
- IEC 180, 48 mm motor shaft No Hawk coupling listed: you need one for a 48 mm motor shaft to the pump shaft.
Other Hawk XLTI Stainless Steel Chemical pumps
XLT2515ESALXLT2515ESARXLT2520ESAXLT3015ESALXLT3015ESARXLT3020ESAXLT3515ESALXLT3515ESARXLT3520ESAXLT4015ESALXLT4015ESARXLT4020ESAXLT5015ESALXLT5015ESARXLT5620ESA