PumpLookupPump and motor part numbers
Mains Units

58 VHT series plunger pump

VHT5813

  • 13Flow, l/min
  • 170Pressure, bar
  • 1450Speed, rpm
  • 4.22Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Interpump 58 VHT series pump

Specification

Flow
13 l/min
Pressure
170 bar
Speed
1450 rpm
Absorbed power
4.22 kW
Plunger
18 mm
Shaft
Solid, Ø24 mm
Weight
7 kg

Exploded view (PDF, Interpump)

Kits

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 271Oil seal Ø15 58/59 series 

Other kits3

Part numberDescriptionPer pumpSuppliers
KIT 415*gr. valve aspiraz. e mand. (58.VHT) 
KIT 416*anelli di tenuta Ø18 (58.VHT) 
KIT 418*gr. tappi intake e mand. (58.VHT)) 

Complete seals1

Part numberDescriptionPer pumpSuppliers
KIT 417*tenuta completa Ø18 (58.VHT) 

Exploded view

Interpump exploded view of the 58 VHT series pump, with position numbers
Interpump's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Interpump make this pump in 2 versions. The list below is for the first, male shaft (key). The others: hollow shaft (key) Ø28 - vers. B. Their parts are in Interpump's parts sheet (link above).

Positions are the balloon numbers on Interpump's exploded view.

PosPart numberDescriptionQty
1 58120741 Manifold for piston Ø18 nickel pl.1
2 36202551 Valve cage3
3 94737600 Spring Ø9,4 x 14,83
4 36200176 Valve plate3
5 36200366 Valve seat3
6 90384150 O-ring Ø17.13 x 2.62 hnbr 70SH 30683
7 36726201 Inlet/outlet valve (60-63 vht)3
8 90384750 O-ring Ø20.29 x 2.62 hnbr 90SH 30813
9 98222500 Valve cap M24 x 1,5 x 17 nickel3
10 99169000 Screw M05 x 55 spec. A2-703
11 96690500 Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT3
12 58040209 Piston Ø18 x 423
13 90367450 Or Ø12.00 x 2.00 hnbr 70SH3
14 36211366 Valve seat3
15 36211276 Spherical valve3
16 94733300 Spring Ø6.2 x 10.5 S.S.3
17 36211151 Valve cage3
18 36729801 Gruppo valvola mandata (58.VHT)3
19 98196700 Plug G 1/8 x 8 nickel1
20 90359350 Or Ø15.60 x 1.78 hnbr 70SH 20623
21 98213750 Plug M18 x 1,5 x 10 Ø23 (nick.)3
22 99317500 Screw m 8 x 60 UNI 59318
23 90221000 Seal Ø18 x 28 x 10 h.p.3
24 58606401 Gr. supp. guarn + boccola Ø18 ot HT3
25 90360650 Or Ø26.70 x 1.78 hnbr 70SH 21063
27 90220000 Seal Ø18 x 22,5 l.p.3
28 58211270 Ring for packing Ø18 HT3
29 98209900 Plug g. 3/8 x 13 nickel1
30 96738000 Washer 17,5 x 23 x 1,51
31 98217900 Plug G 1/2 x 10 nickel1
32 96751400 Washer 21,5 x 27 x 1,51
33 96699000 Washer Ø7.5 x 23 x 0.53
34 58210582 Sponge gasket Ø3 x 941
35 58010022 Pump crankcase1
36 58210451 Protection1
37 90156550 Oil seal Ø15 x 24 x 5/73
38 58050066 Piston guide3
39 97734000 Connecting-rod pin Ø10 x 29,53
40 58030022 Connecting rod3
41 90063500 Circlip Ø25 UNI 74351
42 99183700 Screw m 6 x 14 UNI 59318
43 53210851 Oil level gauge1
44 63021835 Crankshaft C.131
45 91833100 Ball bearing 6305 skf2
46 90389800 O-ring 56,82 x 2,62 (3225)1
47 90164100 Oil seal Ø25 x 62 x 101
48 91489200 Key 8(h9)X7 x 35 UNI 6604/A1
49 98210500 Oil dipstick G3/8 x 51 Ø71
50 90392550 O-ring Ø113.97 x 2.621
51 58160022 Rear crankcase cover1
52 98204250 Plug G1/4"x121
53 90358500 O-ring 10,82 x 1,78 (2043)1
54 90385900 O-ring 25,07 x 2,62 (3100)1
55 90067100 Circlip ZJ301
56 58150122 Coperchio laterale1
57 99303700 Screw m 8 x 16-57394
58 96701600 Washer 8,44
59 50200074 Pump foot2

Motor

A 4-pole motor of at least 4.22 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 132Sa4 5.51450IEC 132SIE310.6  
RN 132Sa4 5.51430IEC 132SIE111.4  
RN 112b4 uprated 5.51420IEC 112IE112.2  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

Other Interpump 58 VHT series pumps

VHT5807VHT5808VHT5811VHT5815