58 VHT series plunger pump
VHT5815
- 15Flow, l/min
- 170Pressure, bar
- 1750Speed, rpm
- 4.87Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 15 l/min
- Pressure
- 170 bar
- Speed
- 1750 rpm
- Absorbed power
- 4.87 kW
- Plunger
- 18 mm
- Shaft
- Solid, Ø24 mm
- Weight
- 7 kg
Kits
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 271 | Oil seal Ø15 58/59 series |
Other kits3
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 415 | *gr. valve aspiraz. e mand. (58.VHT) | ||
| KIT 416 | *anelli di tenuta Ø18 (58.VHT) | ||
| KIT 418 | *gr. tappi intake e mand. (58.VHT)) |
Complete seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 417 | *tenuta completa Ø18 (58.VHT) |
Exploded view
Parts list
Interpump make this pump in 2 versions. The list below is for the first, male shaft (key). The others: hollow shaft (key) Ø28 - vers. B. Their parts are in Interpump's parts sheet (link above).
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 58120741 | Manifold for piston Ø18 nickel pl. | 1 |
| 2 | 36202551 | Valve cage | 3 |
| 3 | 94737600 | Spring Ø9,4 x 14,8 | 3 |
| 4 | 36200176 | Valve plate | 3 |
| 5 | 36200366 | Valve seat | 3 |
| 6 | 90384150 | O-ring Ø17.13 x 2.62 hnbr 70SH 3068 | 3 |
| 7 | 36726201 | Inlet/outlet valve (60-63 vht) | 3 |
| 8 | 90384750 | O-ring Ø20.29 x 2.62 hnbr 90SH 3081 | 3 |
| 9 | 98222500 | Valve cap M24 x 1,5 x 17 nickel | 3 |
| 10 | 99169000 | Screw M05 x 55 spec. A2-70 | 3 |
| 11 | 96690500 | Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT | 3 |
| 12 | 58040209 | Piston Ø18 x 42 | 3 |
| 13 | 90367450 | Or Ø12.00 x 2.00 hnbr 70SH | 3 |
| 14 | 36211366 | Valve seat | 3 |
| 15 | 36211276 | Spherical valve | 3 |
| 16 | 94733300 | Spring Ø6.2 x 10.5 S.S. | 3 |
| 17 | 36211151 | Valve cage | 3 |
| 18 | 36729801 | Gruppo valvola mandata (58.VHT) | 3 |
| 19 | 98196700 | Plug G 1/8 x 8 nickel | 1 |
| 20 | 90359350 | Or Ø15.60 x 1.78 hnbr 70SH 2062 | 3 |
| 21 | 98213750 | Plug M18 x 1,5 x 10 Ø23 (nick.) | 3 |
| 22 | 99317500 | Screw m 8 x 60 UNI 5931 | 8 |
| 23 | 90221000 | Seal Ø18 x 28 x 10 h.p. | 3 |
| 24 | 58606401 | Gr. supp. guarn + boccola Ø18 ot HT | 3 |
| 25 | 90360650 | Or Ø26.70 x 1.78 hnbr 70SH 2106 | 3 |
| 27 | 90220000 | Seal Ø18 x 22,5 l.p. | 3 |
| 28 | 58211270 | Ring for packing Ø18 HT | 3 |
| 29 | 98209900 | Plug g. 3/8 x 13 nickel | 1 |
| 30 | 96738000 | Washer 17,5 x 23 x 1,5 | 1 |
| 31 | 98217900 | Plug G 1/2 x 10 nickel | 1 |
| 32 | 96751400 | Washer 21,5 x 27 x 1,5 | 1 |
| 33 | 96699000 | Washer Ø7.5 x 23 x 0.5 | 3 |
| 34 | 58210582 | Sponge gasket Ø3 x 94 | 1 |
| 35 | 58010022 | Pump crankcase | 1 |
| 36 | 58210451 | Protection | 1 |
| 37 | 90156550 | Oil seal Ø15 x 24 x 5/7 | 3 |
| 38 | 58050066 | Piston guide | 3 |
| 39 | 97734000 | Connecting-rod pin Ø10 x 29,5 | 3 |
| 40 | 58030022 | Connecting rod | 3 |
| 41 | 90063500 | Circlip Ø25 UNI 7435 | 1 |
| 42 | 99183700 | Screw m 6 x 14 UNI 5931 | 8 |
| 43 | 53210851 | Oil level gauge | 1 |
| 44 | 63021635 | Crankshaft C.12 | 1 |
| 45 | 91833100 | Ball bearing 6305 skf | 2 |
| 46 | 90389800 | O-ring 56,82 x 2,62 (3225) | 1 |
| 47 | 90164100 | Oil seal Ø25 x 62 x 10 | 1 |
| 48 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 |
| 49 | 98210500 | Oil dipstick G3/8 x 51 Ø7 | 1 |
| 50 | 90392550 | O-ring Ø113.97 x 2.62 | 1 |
| 51 | 58160022 | Rear crankcase cover | 1 |
| 52 | 98204250 | Plug G1/4"x12 | 1 |
| 53 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 |
| 54 | 90385900 | O-ring 25,07 x 2,62 (3100) | 1 |
| 55 | 90067100 | Circlip ZJ30 | 1 |
| 56 | 58150122 | Coperchio laterale | 1 |
| 57 | 99303700 | Screw m 8 x 16-5739 | 4 |
| 58 | 96701600 | Washer 8,4 | 4 |
| 59 | 50200074 | Pump foot | 2 |
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 4.87 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Sa4 | 5.5 | 1450 | IEC 132S | IE3 | 10.6 | |
| RN 132Sa4 | 5.5 | 1430 | IEC 132S | IE1 | 11.4 | |
| RN 112b4 uprated | 5.5 | 1420 | IEC 112 | IE1 | 12.2 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112b4) ZF044 Motor flange, IEC 100/112 B14
- IEC 132, 38 mm shaft (RNE 132Sa4, RN 132Sa4) No Interpump flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft ZG044 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
- IEC 132, 38 mm motor shaft No Interpump coupling listed: you need one for a 38 mm motor shaft to 24 mm pump shaft.