47 series plunger pump
W913
- 15Flow, l/min
- 130Pressure, bar
- 1750Speed, rpm
- 3.67Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 15 l/min
- Pressure
- 130 bar
- Speed
- 1750 rpm
- Absorbed power
- 3.67 kW
- Plunger
- 20 mm
- Shaft
- Solid
- Weight
- 14 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 1 | Intake/delivery valve | 1 |
Oil seals2
Other kits5
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 4 | Intake/delivery valve caps | ||
| KIT 6 | Piston bolt | ||
| KIT 7 | Head ring Ø20 | ||
| KIT 10 | Packing retainer Ø20 | ||
| KIT 71 | Intermediate ring Ø20 |
Complete seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 28 | Complete seal for piston Ø20 | 3 |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 69 | Packing Ø20 with restop | 1 |
Exploded view
Parts list
Interpump make this pump in 2 versions. The list below is for the first, male shaft (key). The others: male shaft (key) - vers. ATEX. Their parts are in Interpump's parts sheet (link above).
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 47120141 | Manifold | 1 |
| 2 | 99320600 | Hex-head screw M08 x 70 UNI5737 10.9 Fe/Zn5c1A+De | 8 |
| 4 | 90384100 | O-ring 17,12 x 2,62 (3068) | 6 |
| 5 | 36200366 | Valve seat | 6 |
| 6 | 36200176 | Valve plate | 6 |
| 7 | 94737600 | Spring Ø9,4 x 14,8 | 6 |
| 8 | 36200251 | Valve cage | 6 |
| 9 | 90384700 | O-ring 20,29 x 2,62(3081) | 6 |
| 10 | 98222000 | Cap M24 x 2X16 | 6 |
| 11 | 36703201 | Valve assembly. | 6 |
| 12 | 99303900 | Screw m 8 x 16 UNI 5931 | 8 |
| 13 | 47151122 | Closed side cover (47-66) | 1 |
| 14 | 90391300 | O-ring 67,95 x 2,62 (3268) | 2 |
| 15 | 91837500 | Taper bearing | 2 |
| 16 | 90162500 | Oil seal 22 x 32 x 5 | 3 |
| 17 | 90912600 | Bushing 22 x 25 x 30 | 3 |
| 18 | 47010822 | Crankcase | 1 |
| 19 | 98210600 | Oil dip-stick G3/8 x 80 | 1 |
| 20 | 90392200 | O-ring Ø133.02 x 2,62(3525) | 1 |
| 21 | 47021935 | Crankshaft c. 10 s.p.f. u.s. | 1 |
| 22 | 90055700 | Circlip Ø12 UNI 7435 | 6 |
| 23 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 |
| 24 | 97738000 | Connecting-rod pin Ø13 x 35,5 | 3 |
| 25 | 47050466 | Piston guide - S.S. | 3 |
| 26 | 47030001 | Connecting rod | 3 |
| 27 | 99188400 | Screw m 6 x 20 UNI 5931 | 5 |
| 28 | 47160622 | Crankcase cover | 1 |
| 29 | 47221301 | Oil sight glass assembly G3/4 | 1 |
| 30 | 98204250 | Plug G1/4"x12 | 1 |
| 31 | 90358500 | O-ring 10,82 x 1,78 (2043) | 4 |
| 32 | 99309900 | Screw m 8 x 35 UNI 5931 | 6 |
| 34 | 96728600 | Washer 14 x 28 x 0,5 | 3 |
| 35 | 47040409 | Piston Ø20 x 50 | 3 |
| 36 | 90506700 | Anti-extrusion ring | 3 |
| 37 | 96728000 | Washer 14 x 18,5 x 0,5 | 3 |
| 38 | 47219566 | Piston screw | 3 |
| 39 | 47151022 | Open side cover (47-66) | 1 |
| 40 | 97567800 | Shim Ø74,5 x 104 x 0,1 | 1 |
| 40 | 97568000 | Shim Ø74.5 x 104 x 0.3 | 1 |
| 41 | 90164800 | Oil seal 30 x 55 x 7 | 1 |
| 42 | 90361600 | O-ring 34,65 x 1,78 (2137) | 3 |
| 43 | 47080570 | Packing retainer Ø20 x 35 | 3 |
| 44 | 90270500 | Packing 20 x 35 x 7,5 | 3 |
| 45 | 47100051 | Head ring Ø20 | 3 |
| 46 | 47216970 | Intermediate ring Ø20 (spec.) | 3 |
| 47 | 90270400 | Restop ring Ø20 type 6/1 | 3 |
| 48 | 47200074 | Pump foot | 2 |
| 49 | 99364400 | Screw m 10 x 18-5931 | 4 |
| 50 | 96710600 | Washer 10,2 | 4 |
| 51 | 98217600 | Plug G1/2 x 10 | 1 |
| 52 | 96751400 | Washer 21,5 x 27 x 1,5 | 1 |
| 53 | 98210000 | Plug G3/8 x 13 | 1 |
| 54 | 96738000 | Washer 17,5 x 23 x 1,5 | 1 |
| 56 | 90271000 | Packing Ø20 x 35 x 9 l.p. | 3 |
| 60 | 97595000 | Spia livello olio Ø25 x 7.8 NBR | 2 |
| 61 | 47151201 | Coperchio laterale carter con spia olio montata S.47-59-66 | 1 |
| 63 | 70211801 | Oil sight glass | 1 |
| 64 | 47160601 | Gr. coperchio posteriore spia * 47-S | 1 |
| 65 | 90387700 | O-ring 39,34 x 2,62 (3156) | 1 |
| 66 | 90075600 | Circlip Ø45 (ZJ45) | 1 |
| 67 | 47151222 | Side crankcase cover for oil gauge | 1 |
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 3.67 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 112a4 | 4 | 1450 | IEC 112 | IE3 | 8.2 | |
| RN 112a4 | 4 | 1430 | IEC 112 | IE1 | 8.5 | |
| RN 100c4 uprated | 4 | 1405 | IEC 100 | IE1 | 9.1 | |
| RNM 112d4 | 4 | 1400 | IEC 112 | Single-phase | 22 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 100, 28 mm shaft (RN 100c4) ZF151 Motor flange, IEC 100/112 B14
- IEC 112, 28 mm shaft (RNE 112a4, RN 112a4, RNM 112d4) ZF151 Motor flange, IEC 100/112 B14
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 100, 28 mm motor shaft ZG151 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
- IEC 112, 28 mm motor shaft ZG151 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
Other Interpump 47 series pumps
TS1044TS1050TS1630TS1636W131W132W151W162W201W914W916W921W922W928W929WS102WS131WS132WS151WS152WS162WS171WS201WS202WS251WS252WS1036WS1040WS1625WS1630