47 series plunger pump
W928
- 15Flow, l/min
- 275Pressure, bar
- 1750Speed, rpm
- 8.08Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 15 l/min
- Pressure
- 275 bar
- Speed
- 1750 rpm
- Absorbed power
- 8.08 kW
- Plunger
- 16 mm
- Shaft
- Solid, Ø24 mm
- Weight
- 14.5 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 1 | Intake/delivery valve | 1 |
Oil seals2
Other kits4
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 107 | Piston bolt | ||
| KIT 108 | Head ring Ø16 | ||
| KIT 110 | Intermediate ring Ø16 | ||
| KIT 111 | Packing retainer Ø16 |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 109 | Packing Ø16 + restop |
Complete seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 112 | Complete seal piston Ø16 |
Exploded view
Parts list
Interpump make this pump in 2 versions. The list below is for the first, male shaft (key). The others: male shaft (key) - vers. ATEX. Their parts are in Interpump's parts sheet (link above).
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 47121441 | Pump head | 1 |
| 2 | 99320600 | Hex-head screw M08 x 70 UNI5737 10.9 Fe/Zn5c1A+De | 8 |
| 4 | 90384100 | O-ring 17,12 x 2,62 (3068) | 6 |
| 5 | 36200366 | Valve seat | 6 |
| 6 | 36200176 | Valve plate | 6 |
| 7 | 94737600 | Spring Ø9,4 x 14,8 | 6 |
| 8 | 36200251 | Valve cage | 6 |
| 9 | 90384700 | O-ring 20,29 x 2,62(3081) | 6 |
| 10 | 98222400 | Plug m 24 x 1,5 x 7,5 | 6 |
| 11 | 36703201 | Valve assembly. | 6 |
| 12 | 99303900 | Screw m 8 x 16 UNI 5931 | 8 |
| 13 | 47151122 | Closed side cover (47-66) | 1 |
| 14 | 90391300 | O-ring 67,95 x 2,62 (3268) | 2 |
| 15 | 91837500 | Taper bearing | 2 |
| 16 | 90162500 | Oil seal 22 x 32 x 5 | 3 |
| 17 | 90912600 | Bushing 22 x 25 x 30 | 3 |
| 18 | 47010822 | Crankcase | 1 |
| 19 | 98210600 | Oil dip-stick G3/8 x 80 | 1 |
| 20 | 90392200 | O-ring Ø133.02 x 2,62(3525) | 1 |
| 21 | 47021735 | Crankshaft C.16 s.p.f. u.s. | 1 |
| 22 | 90055700 | Circlip Ø12 UNI 7435 | 6 |
| 23 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 |
| 24 | 97738000 | Connecting-rod pin Ø13 x 35,5 | 3 |
| 25 | 47050666 | Piston guide - S.S.(928-9281) | 3 |
| 26 | 47030001 | Connecting rod | 3 |
| 27 | 99188400 | Screw m 6 x 20 UNI 5931 | 5 |
| 28 | 47160622 | Crankcase cover | 1 |
| 29 | 47221301 | Oil sight glass assembly G3/4 | 1 |
| 30 | 98204250 | Plug G1/4"x12 | 1 |
| 31 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 |
| 32 | 99309900 | Screw m 8 x 35 UNI 5931 | 6 |
| 34 | 47211747 | Protection ring | 3 |
| 35 | 47040856 | Piston Ø16 x 49 | 3 |
| 36 | 90503300 | Anti-extrusion ring | 3 |
| 37 | 90357700 | O-ring 7,66 x 1,78 spec. (2031) | 3 |
| 38 | 47219666 | Piston bolt Ø16 | 3 |
| 39 | 47151022 | Open side cover (47-66) | 1 |
| 40 | 97568000 | Shim Ø74.5 x 104 x 0.3 | 1 |
| 40 | 97567800 | Shim Ø74,5 x 104 x 0,1 | 1 |
| 41 | 90164800 | Oil seal 30 x 55 x 7 | 1 |
| 42 | 90361600 | O-ring 34,65 x 1,78 (2137) | 3 |
| 43 | 47080870 | Packing retainer Ø16 | 3 |
| 44 | 90264400 | Low pressure packing 16 x 30 x 8.5 | 3 |
| 45 | 47100351 | Head ring Ø16 | 3 |
| 46 | 47217270 | Intermediate ring Ø16 | 3 |
| 47 | 90264300 | Restop ring Ø16 | 3 |
| 48 | 47200074 | Pump foot | 2 |
| 49 | 99364400 | Screw m 10 x 18-5931 | 4 |
| 50 | 96710600 | Washer 10,2 | 4 |
| 51 | 98217600 | Plug G1/2 x 10 | 1 |
| 52 | 96751400 | Washer 21,5 x 27 x 1,5 | 1 |
| 53 | 98210000 | Plug G3/8 x 13 | 1 |
| 54 | 96738000 | Washer 17,5 x 23 x 1,5 | 1 |
| 55 | 90264200 | Packing Ø16 x 30 | 3 |
| 57 | 70211801 | Oil sight glass | 1 |
| 58 | 90387700 | O-ring 39,34 x 2,62 (3156) | 1 |
| 65 | 97595000 | Spia livello olio Ø25 x 7.8 NBR | 2 |
| 66 | 47151201 | Coperchio laterale carter con spia olio montata S.47-59-66 | 1 |
| 67 | 47160601 | Gr. coperchio posteriore spia * 47-S | 1 |
| 68 | 47151222 | Side crankcase cover for oil gauge | 1 |
| 69 | 90075600 | Circlip Ø45 (ZJ45) | 1 |
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 8.08 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160Ma4 | 11 | 1475 | IEC 160M | IE3 | 22.4 | |
| RN 160Ma4 | 11 | 1450 | IEC 160M | IE1 | 22.4 | |
| RN 132Mb4 uprated | 9.2 | 1440 | IEC 132M | IE1 | 19.2 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Mb4) ZF132 Motor flange, IEC 132 B14
- IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Interpump flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft ZG132 Flexible coupling, IEC 132, 38 mm motor to 24 mm pump
- IEC 160, 42 mm motor shaft ZG66160 Flexible coupling, IEC 160, 42 mm motor shaft
Other Interpump 47 series pumps
TS1044TS1050TS1630TS1636W131W132W151W162W201W913W914W916W921W922W929WS102WS131WS132WS151WS152WS162WS171WS201WS202WS251WS252WS1036WS1040WS1625WS1630