NP25 plunger pump
NP25/21-300H
Part number 00.7382
- 20.8Flow, l/min
- 300Pressure, bar
- 1450Speed, rpm
- 12.3Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 20.8 l/min
- Pressure
- 300 bar
- Speed
- 1450 rpm
- Absorbed power
- 12.3 kW
- Max water temperature
- 70 °C
- Plunger
- 18 mm
- Shaft
- Hollow
- Weight
- 17.4 kg
Kits
No kits are listed for this model. A supplier can look them up from the model NP25/21-300H.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model NP25/21-300H and part number 00.7382.
Motor
This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 12.3 kW.
Flange
None needed: the pump fits straight onto a hollow-shaft motor.
Coupling
None needed: the pump fits straight onto a hollow-shaft motor.
Other Speck NP25 pumps
NP25/11-700RNP25/12-500RNP25/15-500RNP25/20-500NP25/20-500RNP25/21-300NP25/21-350BzNP25/21-350RENP25/21-350SNP25/22-300NP25/22-350BzNP25/24-400NP25/24-400HNP25/24-400RNP25/25-250NP25/25-250HNP25/25-250LNP25/25-250RENP25/25-250SNP25/30-200NP25/30-200 nickel-platedNP25/30-200LNP25/30-200RENP25/30-200SNP25/30-280NP25/38-180NP25/38-180HNP25/38-180LNP25/38-180RENP25/38-280NP25/41-170NP25/41-170CNP25/41-170LNP25/41-170RENP25/41-210NP25/50-150NP25/50-150CNP25/50-150HNP25/50-150LNP25/50-150RENP25/50-150SNP25/50-210NP25/54-200NP25/60-140NP25/60-140HNP25/70-140NP25/70-140 nickel-platedNP25/70-140CNP25/70-140H