NP25 plunger pump
NP25/30-200L
Part number 00.6153-2
- 31.1Flow, l/min
- 200Pressure, bar
- 1450Speed, rpm
- 12.2Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 31.1 l/min
- Pressure
- 200 bar
- Speed
- 1450 rpm
- Absorbed power
- 12.2 kW
- Max water temperature
- 70 °C
- Plunger
- 22 mm
- Shaft
- Solid
- Weight
- 17.4 kg
Kits
No kits are listed for this model. A supplier can look them up from the model NP25/30-200L.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model NP25/30-200L and part number 00.6153-2.
Motor
A 4-pole motor of at least 12.2 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160La4 | 15 | 1465 | IEC 160L | IE3 | 30.5 | |
| RN 160La4 | 15 | 1450 | IEC 160L | IE1 | 30 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft No Speck coupling listed: you need one for a 42 mm motor shaft to the pump shaft.
Other Speck NP25 pumps
NP25/11-700RNP25/12-500RNP25/15-500RNP25/20-500NP25/20-500RNP25/21-300NP25/21-300HNP25/21-350BzNP25/21-350RENP25/21-350SNP25/22-300NP25/22-350BzNP25/24-400NP25/24-400HNP25/24-400RNP25/25-250NP25/25-250HNP25/25-250LNP25/25-250RENP25/25-250SNP25/30-200NP25/30-200 nickel-platedNP25/30-200RENP25/30-200SNP25/30-280NP25/38-180NP25/38-180HNP25/38-180LNP25/38-180RENP25/38-280NP25/41-170NP25/41-170CNP25/41-170LNP25/41-170RENP25/41-210NP25/50-150NP25/50-150CNP25/50-150HNP25/50-150LNP25/50-150RENP25/50-150SNP25/50-210NP25/54-200NP25/60-140NP25/60-140HNP25/70-140NP25/70-140 nickel-platedNP25/70-140CNP25/70-140H