B plunger pump

BD 3.5/30 S

Part number 427700

13.2Flow, l/min
200Pressure, bar
1750Speed, rpm
5Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Specification

Flow: 13.2 l/min
Pressure: 200 bar
Speed: 1750 rpm
Absorbed power: 5 kW
Shaft: Solid, Ø24 mm

Exploded view (PDF, Udor)Dimensions (PDF, Udor)Data sheet (PDF, Udor)

Kits

Valves1

Part number	Description	Per pump	Suppliers
KIT 2	Valve kit

High pressure seals1

Part number	Description	Per pump	Suppliers
KIT 109	High pressure seal kit

Plungers1

Part number	Description	Per pump	Suppliers
KIT 206	Plunger kit

Low pressure seals1

Part number	Description	Per pump	Suppliers
KIT 211	Low pressure seal kit

Parts list

The parts that come in this pump's service kits, by Udor part number.

Part number	Qty in kit	Kit
1101A3	6	KIT 2
600626	6	KIT 2
002115	3	KIT 109
063501	3	KIT 109
110182	3	KIT 109
002367	3	KIT 206
030142	3	KIT 206
030318	3	KIT 206
1101G9	3	KIT 206
140358	3	KIT 206
002390	3	KIT 211
110182	3	KIT 211
122166	3	KIT 211

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 5 kW. Order the one you pick wound for 60 Hz and your supply voltage.

Motor	kW	rpm	Frame	Class	A at 400 V
RNE 132Sa4	5.5	1450	IEC 132S	IE3	10.6
RN 132Sa4	5.5	1430	IEC 132S	IE1	11.4
RN 112b4 uprated	5.5	1420	IEC 112	IE1	12.2

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

IEC 112, 28 mm shaft (RN 112b4) No Udor flange listed for this motor.
IEC 132, 38 mm shaft (RNE 132Sa4, RN 132Sa4) BC10

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

IEC 112, 28 mm motor shaft No Udor coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.
IEC 132, 38 mm motor shaft No Udor coupling listed: you need one for a 38 mm motor shaft to 24 mm pump shaft.