B plunger pump
BD 5.0/30 S
Part number 905800
- 19Flow, l/min
- 200Pressure, bar
- 1750Speed, rpm
- 7Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 19 l/min
- Pressure
- 200 bar
- Speed
- 1750 rpm
- Absorbed power
- 7 kW
- Shaft
- Solid, Ø24 mm
Exploded view (PDF, Udor)Dimensions (PDF, Udor)Data sheet (PDF, Udor)
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2 | Valve kit |
High pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 28 | High pressure seal kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 206 | Plunger kit |
Low pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 208 | Low pressure seal kit |
Parts list
The parts that come in this pump's service kits, by Udor part number.
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 7 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Ma4 | 7.5 | 1465 | IEC 132M | IE3 | 15.3 | |
| RN 132Ma4 | 7.5 | 1440 | IEC 132M | IE1 | 15.3 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RNE 132Ma4, RN 132Ma4) BC10
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft No Udor coupling listed: you need one for a 38 mm motor shaft to 24 mm pump shaft.
Gearbox for engine drive
Other Udor B pumps
BC 13/20 IBC 13/20 SBC 15/15 SBC 15/20 IBC 15/20 SBC 15/20 T MIBC 18/20 IBC 18/20 SBC 21/15 SBC 21/20 SBC 21/20 T MIBD 3.5/30 SBD 4.0/20 SBD 4.0/20 UBD 4.0/30 SBD 4.0/30 UBD 5.0/30 UBD 6.0/30 SBL 4.0/30 WBL 5.0/30 W