PumpLookupPump and motor part numbers
Mains Units

CX plunger pump

CXC 15/50 S

Part number 294800

  • 15Flow, l/min
  • 500Pressure, bar
  • 1450Speed, rpm
  • 14.3Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Udor CX pump

Specification

Flow
15 l/min
Pressure
500 bar
Speed
1450 rpm
Absorbed power
14.3 kW
Shaft
Solid, Ø24 mm

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 85Plunger kit 

Low pressure seals1

Part numberDescriptionPer pumpSuppliers
KIT 87Low pressure seal kit 

High pressure seals1

Part numberDescriptionPer pumpSuppliers
KIT 88High pressure seal kit 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 224Valve kit 

Exploded view

Udor exploded view of the CX pump, with position numbers
Udor's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

The parts that come in this pump's service kits, by Udor part number.

Part numberDescriptionQty in kitKit
0023223KIT 85
0301663KIT 85
0303463KIT 85
0605333KIT 85
1101A43KIT 85
0023543KIT 87
1101B23KIT 87
1221313KIT 87
0635143KIT 88
0635153KIT 88
1101B23KIT 88
1101D83KIT 224
1412153KIT 224
6006393KIT 224
6006453KIT 224

Motor

A 4-pole motor of at least 14.3 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160La4 151465IEC 160LIE330.5  
RN 160La4 151450IEC 160LIE130  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) C14

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Udor coupling listed: you need one for a 42 mm motor shaft to 24 mm pump shaft.

Gearbox for engine drive

Other Udor CX pumps

CXC 18/50 SCXC 22/50 SCXD 3.5/75 SCXD 4.5/75 SCXD 5.0/75 SCXD 6.0/75 S