CX plunger pump
CXD 3.5/75 S
Part number 7400A5
- 13.4Flow, l/min
- 500Pressure, bar
- 1750Speed, rpm
- 12.8Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 13.4 l/min
- Pressure
- 500 bar
- Speed
- 1750 rpm
- Absorbed power
- 12.8 kW
- Shaft
- Solid, Ø24 mm
Kits
Low pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 147 | Low pressure seal kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 151 | Plunger kit |
High pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 153 | High pressure seal kit |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 224 | Valve kit |
Exploded view
Parts list
The parts that come in this pump's service kits, by Udor part number.
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 12.8 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160La4 | 15 | 1465 | IEC 160L | IE3 | 30.5 | |
| RN 160La4 | 15 | 1450 | IEC 160L | IE1 | 30 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) C14
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft No Udor coupling listed: you need one for a 42 mm motor shaft to 24 mm pump shaft.
Gearbox for engine drive
Other Udor CX pumps
CXC 15/50 SCXC 18/50 SCXC 22/50 SCXD 4.5/75 SCXD 5.0/75 SCXD 6.0/75 S