PENTA 600 plunger pump
PENTA-C 30/600 R
Part number 884900
- 30Flow, l/min
- 600Pressure, bar
- 1450Speed, rpm
- 34.4Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 30 l/min
- Pressure
- 600 bar
- Speed
- 1450 rpm
- Absorbed power
- 34.4 kW
- Shaft
- Solid, Ø35 mm
Kits
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 156 | Plunger kit |
High pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 278 | High pressure seal kit |
Low pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 279 | Low pressure seal kit |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 280 | Valve kit |
Parts list
The parts that come in this pump's service kits, by Udor part number.
Motor
A 4-pole motor of at least 34.4 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200b4 | 37 | 1475 | IEC 200 | IE1 | 71 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 200, 55 mm shaft (RN 200b4) No Udor flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 200, 55 mm motor shaft No Udor coupling listed: you need one for a 55 mm motor shaft to 35 mm pump shaft.