PENTA plunger pump
PENTA-C 55/250 R
Part number 880200
- 57Flow, l/min
- 250Pressure, bar
- 1450Speed, rpm
- 27.2Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 57 l/min
- Pressure
- 250 bar
- Speed
- 1450 rpm
- Absorbed power
- 27.2 kW
- Shaft
- Solid, Ø35 mm
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 3P | Valve kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 6P | Plunger kit |
High pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 11P | High pressure seal kit |
Low pressure seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 18P | Low pressure seal kit |
Parts list
The parts that come in this pump's service kits, by Udor part number.
Motor
A 4-pole motor of at least 27.2 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200a4 | 30 | 1475 | IEC 200 | IE1 | 57 | |
| RN 180Lb4 uprated | 30 | 1465 | IEC 180L | IE1 | 58 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 180, 48 mm shaft (RN 180Lb4) No Udor flange listed for this motor.
- IEC 200, 55 mm shaft (RN 200a4) VX02
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 180, 48 mm motor shaft No Udor coupling listed: you need one for a 48 mm motor shaft to 35 mm pump shaft.
- IEC 200, 55 mm motor shaft No Udor coupling listed: you need one for a 55 mm motor shaft to 35 mm pump shaft.
Gearbox for engine drive
Other Udor PENTA pumps
PENTA-B 21/600 RPENTA-B 25/350 RPENTA-B 25/400 RPENTA-B 30/300 RPENTA-B 40/250 RPENTA-B 40/300 RPENTA-B 50/200 RPENTA-C 35/350 RPENTA-C 35/400 RPENTA-C 43/300 RPENTA-C 58/300 RPENTA-C 70/200 R