PumpLookupPump and motor part numbers
Mains Units

PENTA plunger pump

PENTA-C 58/300 R

Part number 882600

  • 58Flow, l/min
  • 300Pressure, bar
  • 1450Speed, rpm
  • 33.3Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Specification

Flow
58 l/min
Pressure
300 bar
Speed
1450 rpm
Absorbed power
33.3 kW
Shaft
Solid, Ø35 mm

Exploded view (PDF, Udor)Dimensions (PDF, Udor)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 3PValve kit 

High pressure seals1

Part numberDescriptionPer pumpSuppliers
KIT 10PHigh pressure seal kit 

Low pressure seals1

Part numberDescriptionPer pumpSuppliers
KIT 103Low pressure seal kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 104Plunger kit 

Parts list

The parts that come in this pump's service kits, by Udor part number.

Part numberDescriptionQty in kitKit
11016410KIT 3P
60069610KIT 3P
0023595KIT 103
1101A95KIT 103
1221345KIT 103
0023235KIT 104
0102125KIT 104
1101A85KIT 104
1403335KIT 104
1403435KIT 104
0635285KIT 10P
1101A95KIT 10P
6030315KIT 10P

Motor

A 4-pole motor of at least 33.3 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 200b4 371475IEC 200IE171  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 200, 55 mm shaft (RN 200b4) VX02

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 200, 55 mm motor shaft No Udor coupling listed: you need one for a 55 mm motor shaft to 35 mm pump shaft.

Gearbox for engine drive

Other Udor PENTA pumps

PENTA-B 21/600 RPENTA-B 25/350 RPENTA-B 25/400 RPENTA-B 30/300 RPENTA-B 40/250 RPENTA-B 40/300 RPENTA-B 50/200 RPENTA-C 35/350 RPENTA-C 35/400 RPENTA-C 43/300 RPENTA-C 55/250 RPENTA-C 70/200 R