58 E2 series plunger pump
E2C2016
- 16Flow, l/min
- 200Pressure, bar
- 1750Speed, rpm
- 6.1Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 16 l/min
- Pressure
- 200 bar
- Speed
- 1750 rpm
- Absorbed power
- 6.1 kW
- Plunger
- 18 mm
- Shaft
- Solid, Ø24 mm
- Weight
- 7 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 269 | Intake/delivery valves |
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 270 | Valve plugs 58 series | ||
| KIT 277 | Complete seal Ø18 58 serie |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 271 | Oil seal Ø15 58/59 series |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 274 | Packing Ø18 58 series |
Exploded view
Parts list
Interpump make this pump in 4 versions. The list below is for the first, male shaft (key). The others: hollow shaft (key) Ø15,9 - vers. I; hy-Pack version - GAS + gear motor 14cc; pump head with VH integrated valve. Their parts are in Interpump's parts sheet (link above).
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 58120241 | Manifold for piston Ø18 | 1 |
| 2 | 36202551 | Valve cage | 3 |
| 3 | 94737600 | Spring Ø9,4 x 14,8 | 3 |
| 4 | 36200176 | Valve plate | 3 |
| 5 | 36200366 | Valve seat | 3 |
| 6 | 90384100 | O-ring 17,12 x 2,62 (3068) | 3 |
| 7 | 36711501 | Intake/delivery valve | 3 |
| 8 | 90384700 | O-ring 20,29 x 2,62(3081) | 3 |
| 9 | 98222600 | Valve cap M24 x 1,5 x 17 | 3 |
| 10 | 99169000 | Screw M05 x 55 spec. A2-70 | 3 |
| 11 | 96690500 | Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT | 3 |
| 12 | 58040209 | Piston Ø18 x 42 | 3 |
| 13 | 90367400 | O-ring Ø12 x 2 (120-20) | 3 |
| 14 | 36211366 | Valve seat | 3 |
| 15 | 36211276 | Spherical valve | 3 |
| 16 | 94733300 | Spring Ø6.2 x 10.5 S.S. | 3 |
| 17 | 36211151 | Valve cage | 3 |
| 18 | 36719301 | Outlet valve | 3 |
| 19 | 90359300 | O-ring 15,60 x 1,78 (2062) | 3 |
| 20 | 98213700 | Valve cap M18 x 1,5 x 10 | 3 |
| 21 | 99317500 | Screw m 8 x 60 UNI 5931 | 8 |
| 22 | 63101151 | Head ring Ø18 h.p. | 3 |
| 23 | 90265350 | Packing Ø18 x 28 x 6/3.7 hp | 3 |
| 24 | 90511150 | Anti-extr. ring Ø18 x 28 x 2 | 3 |
| 25 | 58605801 | Packing retainer+sleeve Ø18 | 3 |
| 26 | 90360600 | O-ring 26,70 x 1,78 (2106) | 3 |
| 28 | 90265000 | Seal Ø18 x 24 x 5 l.p. | 3 |
| 29 | 58210870 | Ring for seal Ø18 | 3 |
| 30 | 98210000 | Plug G3/8 x 13 | 1 |
| 31 | 96738000 | Washer 17,5 x 23 x 1,5 | 1 |
| 32 | 98217600 | Plug G1/2 x 10 | 1 |
| 33 | 96751400 | Washer 21,5 x 27 x 1,5 | 1 |
| 34 | 96699000 | Washer Ø7.5 x 23 x 0.5 | 3 |
| 35 | 58210582 | Sponge gasket Ø3 x 94 | 1 |
| 36 | 58010022 | Pump crankcase | 1 |
| 37 | 58210451 | Protection | 1 |
| 38 | 90156550 | Oil seal Ø15 x 24 x 5/7 | 3 |
| 39 | 58050066 | Piston guide | 3 |
| 40 | 97734000 | Connecting-rod pin Ø10 x 29,5 | 3 |
| 41 | 58030022 | Connecting rod | 3 |
| 42 | 90063500 | Circlip Ø25 UNI 7435 | 1 |
| 43 | 99183700 | Screw m 6 x 14 UNI 5931 | 8 |
| 44 | 53210851 | Oil level gauge | 1 |
| 45 | 63021635 | Crankshaft C.12 | 1 |
| 46 | 91833100 | Ball bearing 6305 skf | 2 |
| 47 | 90389800 | O-ring 56,82 x 2,62 (3225) | 1 |
| 48 | 90164100 | Oil seal Ø25 x 62 x 10 | 1 |
| 49 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 |
| 50 | 98210500 | Oil dipstick G3/8 x 51 Ø7 | 1 |
| 51 | 90392550 | O-ring Ø113.97 x 2.62 | 1 |
| 52 | 58160022 | Rear crankcase cover | 1 |
| 53 | 98204250 | Plug G1/4"x12 | 1 |
| 54 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 |
| 55 | 98196600 | Plug G1/8 x 8 | 1 |
| 56 | 99303700 | Screw m 8 x 16-5739 | 4 |
| 57 | 96701600 | Washer 8,4 | 4 |
| 58 | 50200074 | Pump foot | 2 |
| 59 | 90385900 | O-ring 25,07 x 2,62 (3100) | 1 |
| 60 | 90067100 | Circlip ZJ30 | 1 |
| 61 | 58150122 | Coperchio laterale | 1 |
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 6.1 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Ma4 | 7.5 | 1465 | IEC 132M | IE3 | 15.3 | |
| RN 132Ma4 | 7.5 | 1440 | IEC 132M | IE1 | 15.3 | |
| RN 112c4 uprated | 6.3 | 1420 | IEC 112 | IE1 | 12.5 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112c4) ZF044 Motor flange, IEC 100/112 B14
- IEC 132, 38 mm shaft (RNE 132Ma4, RN 132Ma4) No Interpump flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft ZG044 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
- IEC 132, 38 mm motor shaft No Interpump coupling listed: you need one for a 38 mm motor shaft to 24 mm pump shaft.
Other Interpump 58 E2 series pumps
E2B1618E2B1711E2B1712E2B1713E2B2008E2B2010E2B2014E2B2015E2B2808E2C1713E2C1714E2C2015E2C2109E2C2111E2C2112E2C2809E2D2010E2D2011E2D2013E2D2015E2D2016E2D2810E2D2811E2D2812E2D2813E2E2108E2E2111E2E2113E2E2114E2E2116E2E2808E2E2810E2E2811E2E2812E2E2813E2E2815