58 E2 series plunger pump
E2D2811
- 11Flow, l/min
- 275Pressure, bar
- 2800Speed, rpm
- 5.81Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 11 l/min
- Pressure
- 275 bar
- Speed
- 2800 rpm
- Absorbed power
- 5.81 kW
- Plunger
- 13 mm
- Shaft
- Solid, Ø24 mm
- Weight
- 7 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 269 | Intake/delivery valves |
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 270 | Valve plugs 58 series | ||
| KIT 275 | Complete seal Ø13 58 serie |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 271 | Oil seal Ø15 58/59 series |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 272 | Packing Ø13 58 series |
Exploded view
Parts list
Interpump make this pump in 3 versions. The list below is for the first, male shaft (key). The others: hollow shaft (key) Ø28 - vers. B; pump head with VH integrated valve. Their parts are in Interpump's parts sheet (link above).
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 58120041 | Manifold for piston Ø13 | 1 |
| 2 | 36202551 | Valve cage | 3 |
| 3 | 94737600 | Spring Ø9,4 x 14,8 | 3 |
| 4 | 36200176 | Valve plate | 3 |
| 5 | 36200366 | Valve seat | 3 |
| 6 | 90384100 | O-ring 17,12 x 2,62 (3068) | 3 |
| 7 | 36711501 | Intake/delivery valve | 3 |
| 8 | 90384700 | O-ring 20,29 x 2,62(3081) | 3 |
| 9 | 98222600 | Valve cap M24 x 1,5 x 17 | 3 |
| 10 | 99169000 | Screw M05 x 55 spec. A2-70 | 3 |
| 11 | 96690500 | Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT | 3 |
| 12 | 58040009 | Piston Ø13 x 42 | 3 |
| 13 | 90367400 | O-ring Ø12 x 2 (120-20) | 3 |
| 14 | 36211366 | Valve seat | 3 |
| 15 | 36211276 | Spherical valve | 3 |
| 16 | 94733300 | Spring Ø6.2 x 10.5 S.S. | 3 |
| 17 | 36211151 | Valve cage | 3 |
| 18 | 36719301 | Outlet valve | 3 |
| 19 | 90359300 | O-ring 15,60 x 1,78 (2062) | 3 |
| 20 | 98213700 | Valve cap M18 x 1,5 x 10 | 3 |
| 21 | 99317500 | Screw m 8 x 60 UNI 5931 | 8 |
| 22 | 44100251 | Head ring Ø13 | 3 |
| 23 | 90260200 | Packing Ø13 x 21 x 4 h.p. | 3 |
| 24 | 90507650 | Anti-extr.ring Ø13 x 21 x 3 | 3 |
| 25 | 58605601 | Packing retainer+sleeve Ø13 | 3 |
| 26 | 90360600 | O-ring 26,70 x 1,78 (2106) | 3 |
| 28 | 90260100 | Packing Ø13 x 20 x 5 lp | 3 |
| 29 | 58210670 | Ring for seal Ø13 | 3 |
| 30 | 98210000 | Plug G3/8 x 13 | 1 |
| 31 | 96738000 | Washer 17,5 x 23 x 1,5 | 1 |
| 32 | 98217600 | Plug G1/2 x 10 | 1 |
| 33 | 96751400 | Washer 21,5 x 27 x 1,5 | 1 |
| 34 | 96699000 | Washer Ø7.5 x 23 x 0.5 | 3 |
| 35 | 58210582 | Sponge gasket Ø3 x 94 | 1 |
| 36 | 58010022 | Pump crankcase | 1 |
| 37 | 58210451 | Protection | 1 |
| 38 | 90156550 | Oil seal Ø15 x 24 x 5/7 | 3 |
| 39 | 58050066 | Piston guide | 3 |
| 40 | 97734000 | Connecting-rod pin Ø10 x 29,5 | 3 |
| 41 | 58030022 | Connecting rod | 3 |
| 42 | 90063500 | Circlip Ø25 UNI 7435 | 1 |
| 43 | 99183700 | Screw m 6 x 14 UNI 5931 | 8 |
| 44 | 53210851 | Oil level gauge | 1 |
| 45 | 63029135 | Crankshaft C.11 | 1 |
| 46 | 91833100 | Ball bearing 6305 skf | 2 |
| 47 | 90389800 | O-ring 56,82 x 2,62 (3225) | 1 |
| 48 | 90164100 | Oil seal Ø25 x 62 x 10 | 1 |
| 49 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 |
| 50 | 98210500 | Oil dipstick G3/8 x 51 Ø7 | 1 |
| 51 | 90392550 | O-ring Ø113.97 x 2.62 | 1 |
| 52 | 58160022 | Rear crankcase cover | 1 |
| 53 | 98204250 | Plug G1/4"x12 | 1 |
| 54 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 |
| 55 | 98196600 | Plug G1/8 x 8 | 1 |
| 56 | 99303700 | Screw m 8 x 16-5739 | 4 |
| 57 | 96701600 | Washer 8,4 | 4 |
| 58 | 50200074 | Pump foot | 2 |
| 59 | 90385900 | O-ring 25,07 x 2,62 (3100) | 1 |
| 60 | 90067100 | Circlip ZJ30 | 1 |
| 61 | 58150122 | Coperchio laterale | 1 |
Motor
A 2-pole motor of at least 5.81 kW drives this pump at 2800 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Sb2 | 7.5 | 2910 | IEC 132S | IE3 | 13.1 | |
| RN 132Sb2 | 7.5 | 2900 | IEC 132S | IE1 | 14.8 | |
| RN 112c2 uprated | 7.5 | 2860 | IEC 112 | IE1 | 15.5 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112c2) ZF044 Motor flange, IEC 100/112 B14
- IEC 132, 38 mm shaft (RNE 132Sb2, RN 132Sb2) No Interpump flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft ZG044 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
- IEC 132, 38 mm motor shaft No Interpump coupling listed: you need one for a 38 mm motor shaft to 24 mm pump shaft.
Other Interpump 58 E2 series pumps
E2B1618E2B1711E2B1712E2B1713E2B2008E2B2010E2B2014E2B2015E2B2808E2C1713E2C1714E2C2015E2C2016E2C2109E2C2111E2C2112E2C2809E2D2010E2D2011E2D2013E2D2015E2D2016E2D2810E2D2812E2D2813E2E2108E2E2111E2E2113E2E2114E2E2116E2E2808E2E2810E2E2811E2E2812E2E2813E2E2815