58 E2 series plunger pump
E2E2811
- 11Flow, l/min
- 275Pressure, bar
- 3400Speed, rpm
- 5.81Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 11 l/min
- Pressure
- 275 bar
- Speed
- 3400 rpm
- Absorbed power
- 5.81 kW
- Plunger
- 13 mm
- Shaft
- Hollow
- Weight
- 7 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 269 | Intake/delivery valves |
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 270 | Valve plugs 58 series | ||
| KIT 275 | Complete seal Ø13 58 serie |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 271 | Oil seal Ø15 58/59 series |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 272 | Packing Ø13 58 series |
Exploded view
Parts list
Interpump make this pump in 2 versions. The list below is for the first, hollow shaft (key) Ø25,4 - vers. C1". The others: pump head with VH integrated valve. Their parts are in Interpump's parts sheet (link above).
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 58120041 | Manifold for piston Ø13 | 1 |
| 2 | 36202551 | Valve cage | 3 |
| 3 | 94737600 | Spring Ø9,4 x 14,8 | 3 |
| 4 | 36200176 | Valve plate | 3 |
| 5 | 36200366 | Valve seat | 3 |
| 6 | 90384100 | O-ring 17,12 x 2,62 (3068) | 3 |
| 7 | 36711501 | Intake/delivery valve | 3 |
| 8 | 90384700 | O-ring 20,29 x 2,62(3081) | 3 |
| 9 | 98222600 | Valve cap M24 x 1,5 x 17 | 3 |
| 10 | 99169000 | Screw M05 x 55 spec. A2-70 | 3 |
| 11 | 96690500 | Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT | 3 |
| 12 | 58040009 | Piston Ø13 x 42 | 3 |
| 13 | 90367400 | O-ring Ø12 x 2 (120-20) | 3 |
| 14 | 36211366 | Valve seat | 3 |
| 15 | 36211276 | Spherical valve | 3 |
| 16 | 94733300 | Spring Ø6.2 x 10.5 S.S. | 3 |
| 17 | 36211151 | Valve cage | 3 |
| 18 | 36719301 | Outlet valve | 3 |
| 19 | 90359300 | O-ring 15,60 x 1,78 (2062) | 3 |
| 20 | 98213700 | Valve cap M18 x 1,5 x 10 | 3 |
| 21 | 99317500 | Screw m 8 x 60 UNI 5931 | 8 |
| 22 | 44100251 | Head ring Ø13 | 3 |
| 23 | 90260200 | Packing Ø13 x 21 x 4 h.p. | 3 |
| 24 | 90507650 | Anti-extr.ring Ø13 x 21 x 3 | 3 |
| 25 | 58605601 | Packing retainer+sleeve Ø13 | 3 |
| 26 | 90360600 | O-ring 26,70 x 1,78 (2106) | 3 |
| 28 | 90260100 | Packing Ø13 x 20 x 5 lp | 3 |
| 29 | 58210670 | Ring for seal Ø13 | 3 |
| 30 | 98210000 | Plug G3/8 x 13 | 1 |
| 31 | 96738000 | Washer 17,5 x 23 x 1,5 | 1 |
| 32 | 98217600 | Plug G1/2 x 10 | 1 |
| 33 | 96751400 | Washer 21,5 x 27 x 1,5 | 1 |
| 34 | 96699000 | Washer Ø7.5 x 23 x 0.5 | 3 |
| 35 | 58210582 | Sponge gasket Ø3 x 94 | 1 |
| 36 | 58010022 | Pump crankcase | 1 |
| 37 | 58210451 | Protection | 1 |
| 38 | 90156550 | Oil seal Ø15 x 24 x 5/7 | 3 |
| 39 | 58050066 | Piston guide | 3 |
| 40 | 97734000 | Connecting-rod pin Ø10 x 29,5 | 3 |
| 41 | 58030022 | Connecting rod | 3 |
| 42 | 58150122 | Coperchio laterale | 1 |
| 43 | 99183700 | Screw m 6 x 14 UNI 5931 | 8 |
| 44 | 53210851 | Oil level gauge | 1 |
| 45 | 63028265 | Crankshaft C.9 Ø1" hollow | 1 |
| 46 | 91833100 | Ball bearing 6305 skf | 1 |
| 47 | 90409700 | O-ring 55,56 x 3,53 (159) | 1 |
| 48 | 90169000 | Oil seal Ø45 x 62 x 8 | 1 |
| 49 | 99179000 | Screw M6 x 6 UNI 5929 12.9 | 1 |
| 50 | 98210500 | Oil dipstick G3/8 x 51 Ø7 | 1 |
| 51 | 90392550 | O-ring Ø113.97 x 2.62 | 1 |
| 52 | 58160022 | Rear crankcase cover | 1 |
| 53 | 98204250 | Plug G1/4"x12 | 1 |
| 54 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 |
| 55 | 91856800 | Needle bearing dhk 4520 | 1 |
| 56 | 99191200 | Screw m 6 x 30 UNI 5931 | 4 |
| 57 | 99334600 | Screw 3/8"-16 x 1-1/4"B18.2.1 G5 | 4 |
| 57 | 99275500 | Screw 5/16"-24 x 1" ansi B18.2.1 | 4 |
| 58 | 96710400 | Washer 10,5 x 16 x 1 | 4 |
| 58 | 96702000 | Washer 8,4 x 15 x 1,5 | 4 |
| 59 | 10051822 | Flange for petrol engine | 1 |
| 60 | 90063500 | Circlip Ø25 UNI 7435 | 1 |
| 61 | 98196600 | Plug G1/8 x 8 | 1 |
| 62 | 90385900 | O-ring 25,07 x 2,62 (3100) | 1 |
| 63 | 90067100 | Circlip ZJ30 | 1 |
| 64 | 90389800 | O-ring 56,82 x 2,62 (3225) | 1 |
Motor
This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 5.81 kW.
Flange
None needed: the pump fits straight onto a hollow-shaft motor.
Coupling
None needed: the pump fits straight onto a hollow-shaft motor.
Other Interpump 58 E2 series pumps
E2B1618E2B1711E2B1712E2B1713E2B2008E2B2010E2B2014E2B2015E2B2808E2C1713E2C1714E2C2015E2C2016E2C2109E2C2111E2C2112E2C2809E2D2010E2D2011E2D2013E2D2015E2D2016E2D2810E2D2811E2D2812E2D2813E2E2108E2E2111E2E2113E2E2114E2E2116E2E2808E2E2810E2E2812E2E2813E2E2815