NP10 plunger pump
NP10/1-170
Part number 00.7133
- 1.2Flow, l/min
- 170Pressure, bar
- 1450Speed, rpm
- 0.5Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 1.2 l/min
- Pressure
- 170 bar
- Speed
- 1450 rpm
- Absorbed power
- 0.5 kW
- Max water temperature
- 70 °C
- Plunger
- 12 mm
- Shaft
- Solid
- Weight
- 6.1 kg
Kits
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 14.0766 | Seal repair kit | 1 |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 14.0782 | Valve repair kit | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Speck's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 01.1051 | Crankcase | 1 | |
| 2 | 00.4011 | Oil Dipstick | 1 | |
| 3 | 03.0228 | Crankcase Cover | 1 | |
| 3 | 00.2372 | Oil Drain Plug Assy (item 3A) | 1 | |
| 4 | 06.0050 | O-Ring | 1 | |
| 5 | 00.3842 | Plug Assy | 1 | |
| 6 | 21.0069 | Hexagon Screw | 4 | |
| 6 | 07.3052 | Spring Washer (item 6A) | 4 | |
| 7 | 03.0229 | Bearing Cover | 2 | |
| 8 | 07.3248 | Oil Sight Glass | 1 | |
| 9 | 06.0249 | O-Ring | 1 | |
| 10 | 21.0028 | Hexagon Screw | 8 | |
| 11 | 06.0883 | Radial Shaft Seal | 1 | |
| 12 | 05.0227 | Ball Bearing (item 12A) | 1 | |
| 12 | 05.0078 | Ball Bearing (item 12B) | 1 | |
| 13 | 11.0880 | Crankshaft NP10/1-170 | 1 | |
| 14 | 07.3049 | Fitting Key | 1 | |
| 15 | 16.0036 | Connecting Rod | 3 | |
| 16 | 00.5297 | Plunger Assy 12 mm dia. | 3 | |
| 17 | 11.0585 | Crosshead Pin | 3 | |
| 19 | 06.1081 | Gear Seal | 3 | 14.0766 |
| 20 | 07.4001 | Seal Adaptor | 3 | |
| 21 | 06.1080 | O-Ring | 3 | 14.0766 |
| 23 | 06.1332 | Grooved Seal | 3 | 14.0766 |
| 23 | 06.1250 | Grooved Seal (item 23A) | 3 | 14.0766 |
| 24 | 07.1782 | Support Ring | 3 | 14.0766 |
| 25 | 07.4007 | Drip Return Ring | 3 | |
| 26 | 01.0831 | Valve Casing | 1 | |
| 26 | 00.7310 | Valve Assy (27-30) (item 26A) | 6 | 14.0782 |
| 31 | 06.0078 | O-Ring | 6 | 14.0782 |
| 32 | 07.2117 | Plug M22x1,5 | 6 | |
| 33 | 06.0758 | O-Ring | 6 | 14.0782 |
| 34 | 21.0356 | Hexagon Screw | 8 | |
| 36 | 07.0608 | Plug G3/8 | 1 | |
| 36 | 07.0705 | Plug G1/2 (item 36A) | 1 | |
| 00.7140 | Gear Assy NP10/1-170 (1-21, 23A, 34) | 1 | ||
| 00.5318 | Pump Head Assy (23/24-36A without 34) | 1 |
Motor
A 4-pole motor of at least 0.5 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 80a4 | 0.55 | 1420 | IEC 80 | IE1 | 1.5 | |
| RN 71c4 uprated | 0.55 | 1370 | IEC 71 | IE1 | 1.7 | |
| RNM 71c4 | 0.55 | 1390 | IEC 71 | Single-phase | 5.2 at 230 V | |
| RNM 80a4 | 0.55 | 1420 | IEC 80 | Single-phase | 4.8 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 71, 14 mm shaft (RN 71c4, RNM 71c4) No Speck flange listed for this motor.
- IEC 80, 19 mm shaft (RN 80a4, RNM 80a4) No Speck flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 71, 14 mm motor shaft No Speck coupling listed: you need one for a 14 mm motor shaft to the pump shaft.
- IEC 80, 19 mm motor shaft No Speck coupling listed: you need one for a 19 mm motor shaft to the pump shaft.
Other Speck NP10 pumps
NP10/1-170 nickel-platedNP10/1-170RENP10/2-170NP10/2-170 nickel-platedNP10/2-170RENP10/3-170NP10/4-150NP10/4-150 nickel-platedNP10/4-150RENP10/4-150SNP10/7-150NP10/7-150 nickel-platedNP10/7-150RENP10/7-150SNP10/10-150NP10/10-150 nickel-platedNP10/10-150CNP10/10-150RENP10/10-150SNP10/13-150NP10/13-150 nickel-platedNP10/13-150RENP10/13-150SNP10/15-150NP10/15-150 nickel-platedNP10/15-150CNP10/15-150RENP10/15-150S