Name: Speck NP10/1-170RE plunger pump
Brand: Speck

Kits

No kits are listed for this model. A supplier can look them up from the model NP10/1-170RE.

Parts list

For parts not covered by the kits above, ask a supplier and quote the model NP10/1-170RE and part number 00.7192.

A 4-pole motor of at least 0.5 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

Motor	kW	rpm	Frame	Class	A at 400 V
RN 80a4	0.55	1420	IEC 80	IE1	1.5
RN 71c4 uprated	0.55	1370	IEC 71	IE1	1.7
RNM 71c4	0.55	1390	IEC 71	Single-phase	5.2 at 230 V
RNM 80a4	0.55	1420	IEC 80	Single-phase	4.8 at 230 V

The contactor and overload relay for each motor are on the motor's page.

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

IEC 71, 14 mm motor shaft No Speck coupling listed: you need one for a 14 mm motor shaft to the pump shaft.
IEC 80, 19 mm motor shaft No Speck coupling listed: you need one for a 19 mm motor shaft to the pump shaft.