Name: Speck NP10/13-150S plunger pump
Brand: Speck

Kits

No kits are listed for this model. A supplier can look them up from the model NP10/13-150S.

Parts list

For parts not covered by the kits above, ask a supplier and quote the model NP10/13-150S and part number 00.7213.

A 4-pole motor of at least 4 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

Motor	kW	rpm	Frame	Class	A at 400 V
RNE 112a4	4	1450	IEC 112	IE3	8.2
RN 112a4	4	1430	IEC 112	IE1	8.5
RN 100c4 uprated	4	1405	IEC 100	IE1	9.1
RNM 112d4	4	1400	IEC 112	Single-phase	22 at 230 V

The contactor and overload relay for each motor are on the motor's page.

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

IEC 100, 28 mm shaft (RN 100c4) No Speck flange listed for this motor.
IEC 112, 28 mm shaft (RNE 112a4, RN 112a4, RNM 112d4) No Speck flange listed for this motor.

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

IEC 100, 28 mm motor shaft No Speck coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
IEC 112, 28 mm motor shaft No Speck coupling listed: you need one for a 28 mm motor shaft to the pump shaft.