PumpLookupPump and motor part numbers
Mains Units

15 Frame plunger pump

1531

  • 59Flow, l/min
  • 103Pressure, bar
  • 1450Speed, rpm
  • 11.95Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Cat Pumps 15 Frame pump

Specification

Flow
59 l/min
Pressure
103 bar
Speed
1450 rpm
Absorbed power
11.95 kW
Plunger
25 mm
Shaft
Solid, Ø30 mm
Weight
25 kg

Data sheet (PDF, Cat Pumps)

Kits

Valves4

Part numberDescriptionPer pumpSuppliers
31271Valve kit, NBR (STD)2 
31281Valve kit, FPM (.0110)2 
31773Valve kit, EPDM (.0220)2 
76360Valve kit, FFKM (.0770)2 

Seal kits4

Part numberDescriptionPer pumpSuppliers
31355Seal kit, NBR (STD)1 
31455Seal kit, FPM (.0110)1 
31753Seal kit, EPDM (.0220)1 
76682Seal kit, FFKM (.0770)1 

Exploded view

Cat Pumps exploded view of the 15 Frame pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 49651 Screw, Sems HHC (M8 x 20)8
8 134805 Cover, Bearing2
9 855043 Shim, Split 2-Piece, Bearing Cover0
10 11340 O-Ring, Bearing Cover-70D2
11 43495 Seal, Oil, Crankshaft2
12 855044 Shim, Split 2-Piece, Bearing Cover0
15 39060 Bearing, Roller2
20 48600 Rod, Connecting Assembly3
25 43494 Crankshaft, Dual-End (M30)1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Filler Cap-70D1
37 92241 Gauge, Oil, Bubble with Gasket-80D1
38 44428 Gasket, Flat, Oil Gauge-80D1
40 92542 Screw, Sems HHC (M6 x 20)4
48 25625 Plug, Drain ( 1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug-70D1
50 133576 Cover, Rear1
51 44834 O-Ring, Rear Cover-70D1
53 134889 Crankcase (Includes Guide Pins)1
54 27488 Pin, Guide2
56 44664 Pan, Oil1
64 43507 Pin, Crosshead3
65 48360 Rod, Plunger, Short3
69 126592 Washer, Oil Seal3
70 43500 Seal, Oil Crankcase3
75 43506 Slinger, Barrier3
90 48606 Plunger, Ceramic (M25 x 92)3
95 89651 Stud, Plunger Retainer (M6 x 70)3
96 43235 Backup Ring, Plunger Retainer3
97 17399 O-Ring, Plunger Retainer-80D3
98 44041 Gasket, Plunger Retainer3
99 44031 Retainer, Plunger3
100 899509 Retainer, Seal 2-Piece3
101 48716 Wick, Long Tab3
106 44086 Seal, Low-Pressure with SS-Spring3
110 48683 Manifold, Inlet1
112 14200 O-Ring, Inlet Manifold-70D3
117 87952 Screw, HSH (M10 x 55)4
126 48669 Adapter, Female3
126 76667 Adapter, Female3
127 44610 V-Packing6
128 113025 Adapter, Male3
141 48672 Spring, Coil18
142 48670 Spacer with Coil Springs3
155 17629 O-Ring, Spacer-80D6
156 28243 Backup Ring, Spacer6
162 48363 Backup Ring, Seat6
163 26142 O-Ring, Seat-80D6
164 48688 Seat6
166 670108 Valve6
167 48687 Spring, Valve6
168 44735 Retainer, Spring6
170 44794 Washer, Spring Retainer6
171 48689 Spring, Coil6
172 17629 O-Ring, Valve Plug-80D6
174 49294 Plug, Valve6
185 48685 Manifold, Discharge1
188 89981 Screw, HSH (M12 x 70)6
250 855047 Protector, Shaft with 2 Screws1

Motor

A 4-pole motor of at least 11.95 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160La4 151465IEC 160LIE330.5  
RN 160La4 151450IEC 160LIE130  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) No Cat Pumps flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Cat Pumps coupling listed: you need one for a 42 mm motor shaft to 30 mm pump shaft.

Other Cat Pumps 15 Frame pumps

650660661D105010511051D10571061X1061XD15301540E15411560158017301731