PumpLookupPump and motor part numbers
Mains Units

15 Frame plunger pump

660

  • 37.9Flow, l/min
  • 207Pressure, bar
  • 1429Speed, rpm
  • 15.32Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Cat Pumps 15 Frame pump

Specification

Flow
37.9 l/min
Pressure
207 bar
Speed
1429 rpm
Absorbed power
15.32 kW
Plunger
20 mm
Shaft
Solid, Ø30 mm
Weight
19 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits5

Part numberDescriptionPer pumpSuppliers
30798Seal kit, NBR (STD)1 
31033Seal kit, FPM (.0110)1 
33919Seal kit, EPDM (.0220)1 
76056Seal kit, STHT (.3400)1 
76195Seal kit, FFKM (.0770)1 

Valves3

Part numberDescriptionPer pumpSuppliers
30820Valve kit, NBR (STD)2 
31259Valve kit, EPDM (.0220)2 
31263Valve kit, FPM (.0110)2 

Exploded view

Cat Pumps exploded view of the 15 Frame pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 126540 Screw, HHC Sems (M8 x 20)8
8 134805 Cover, Bearing2
9 855043 Split Shim, Bearing Cover, 2-Piece0
10 11340 O-Ring, Bearing Case2
11 43495 Seal, Oil, Crankshaft2
12 855044 Split Shim, Bearing Cover, 2-Piece0
15 39060 Bearing, Roller2
20 48600 Rod Assembly, Connecting3
25 43494 Crankshaft Dual-End (M30)1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Filler Cap1
37 92241 Gauge, Oil, Bubble with Gasket1
38 44428 Gasket, Flat, Oil Gauge1
40 126541 Screw, HHC Sems (M6 x 20)4
48 25625 Plug, Drain ( 1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug1
50 133576 Cover, Rear1
51 44834 O-Ring, Rear Cover1
53 134836 Crankcase (Includes: 54, 55)1
54 27488 Pin, Guide2
55 126545 Stud (M10 x 45)4
56 44664 Pan, Oil1
64 43507 Pin, Crosshead3
65 48228 Rod, Plunger, Long3
69 126592 Washer, Seal3
70 43500 Seal, Oil, Crankcase3
75 43506 Slinger, Barrier3
88 45675 Washer, Keyhole3
89 43505 Spacer, Plunger3
90 43300 Plunger (M20 x 77)3
96 43235 Backup Ring, Plunger Retainer3
97 17399 O-Ring, Plunger Retainer3
98 45891 Gasket, Plunger Retainer3
99 104360 Retainer with Stud, Plunger (M6)3
100 855001 Retainer, Seal, 2-Piece3
101 43508 Wick, Long Tab3
106 44071 Seal, Low-Pressure with SS-Spring3
120 49291 Case, Seal3
121 14762 O-Ring, Seal Case3
126 43515 Adapter, Female3
127 44607 V-Packing6
128 43517 Adapter, Male3
139 20326 Plug, Inlet (3/4" NPT[M])1
162 43248 Backup Ring, Seat6
163 43249 O-Ring, Seat6
164 43722 Seat6
166 43721 Valve6
167 43751 Spring6
168 44564 Retainer, Spring6
172 17617 O-Ring, Valve Plug6
174 43850 Plug, Valve6
185 45975 Head, Manifold1
192 126231 Lockwasher (M10)4
194 126522 Nut, Hex (M10)4
250 855046 Protector, Shaft with Two (2) STCP Screws1

Motor

A 4-pole motor of at least 15.32 kW drives this pump at 1429 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 180Ma4 18.51465IEC 180MIE137  
RN 160Lb4 uprated 18.51420IEC 160LIE138  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RN 160Lb4) No Cat Pumps flange listed for this motor.
  • IEC 180, 48 mm shaft (RN 180Ma4) No Cat Pumps flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Cat Pumps coupling listed: you need one for a 42 mm motor shaft to 30 mm pump shaft.
  • IEC 180, 48 mm motor shaft No Cat Pumps coupling listed: you need one for a 48 mm motor shaft to 30 mm pump shaft.

Other Cat Pumps 15 Frame pumps

650661D105010511051D10571061X1061XD153015311540E15411560158017301731