PumpLookupPump and motor part numbers
Mains Units

15 Frame plunger pump

1580

  • 45.4Flow, l/min
  • 207Pressure, bar
  • 1180Speed, rpm
  • 18.39Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Cat Pumps 15 Frame pump

Specification

Flow
45.4 l/min
Pressure
207 bar
Speed
1180 rpm
Absorbed power
18.39 kW
Plunger
24 mm
Shaft
Solid, Ø30 mm
Weight
27 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits3

Part numberDescriptionPer pumpSuppliers
32125Seal kit, STHT (.3400)1 
76432Seal kit, NBR (STD)1 
76858Seal kit, FPM (.0110)1 

Valves2

Part numberDescriptionPer pumpSuppliers
76428Valve kit, NBR (STD)1 
76871Valve kit, FPM (.0110)1 

Exploded view

Cat Pumps exploded view of the 15 Frame pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 126540 Screw, HHC, Sems (M8 x 20)8
8 134805 Cover, Bearing2
9 855043 Shim, Split, 2-Piece0
10 11340 O-Ring, Bearing Cover-70D2
11 43495 Seal, Oil, Crankshaft2
12 855044 Shim, Split, 2-Piece0
15 39060 Bearing, Roller2
20 126805 Rod, Connecting Assembly3
25 43494 Crankshaft, Dual-End (M30)1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Filler Cap-70D1
37 92241 Gauge, Oil, Bubble with Gasket, 80D1
38 44428 Gasket, Flat, Oil Gauge-80D1
40 126541 Screw, HHC, Sems (M6 x 20)4
48 25625 Plug, Drain ( 1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug-70D1
50 133576 Cover, Rear1
51 44834 O-Ring, Rear Cover-70D1
53 134889 Crankcase (Includes Guide Pins)1
54 27488 Pin, Guide2
56 44664 Pan, Oil1
64 43507 Pin, Crosshead3
65 49223 Rod, Plunger3
69 126592 Washer, Oil Seal3
70 43500 Seal, Oil Crankcase3
75 43506 Slinger, Barrier3
88 45675 Washer, Keyhole3
89 43553 Spacer3
90 43552 Plunger, Ceramic (M24 x 77)3
96 43235 Back-up Ring, Plunger Retainer3
97 17399 O-Ring, Plunger Retainer-80D3
98 45891 Gasket, Plunger Retainer3
99 104360 Retainer with Stud, Plunger3
100 855001 Retainer, Seal, 2-Piece3
101 43554 Wick3
106 44035 Seal, LPS with SS-Spring3
110 133140 Manifold, Inlet1
112 14179 O-Ring, Inlet Manifold-70D3
117 126515 Screw, HSH (M10 x 55)4
126 43558 Adapter, Female3
127 43559 V-Packing6
128 43560 Adapter, Male3
155 11442 O-Ring, Adapter-70D6
156 23086 Backup Ring, Adapter6
157 133141 Adapter3
160 49238 O-Ring, Seat, Inlet-90D3
161 133144 Seat, Inlet3
162 49235 Backup Ring, Seat3
163 49236 O-Ring, Seat, Discharge-70D3
164 49234 Seat, Discharge3
165 49198 Retainer, Spring, Inlet3
166 48793 Valve6
167 43751 Spring6
168 49199 Retainer, Spring, Discharge3
172 14176 O-Ring, Valve Plug-70D3
173 49232 Backup Ring, Valve Plug3
174 49239 Plug, Valve3
177 126783 Screw, HSH (M12 x 25)8
178 49227 Cover, Valve1
185 133143 Manifold, Discharge1
188 126519 Screw, HSH (M12 x 70)6
250 855046 Protector, Shaft with 2-Screws1

Motor

Rated at 1180 rpm, the speed of a 6-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 18.39 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 200a6 18.5985IEC 200IE138  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 200, 55 mm shaft (RN 200a6) No Cat Pumps flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 200, 55 mm motor shaft No Cat Pumps coupling listed: you need one for a 55 mm motor shaft to 30 mm pump shaft.

Other Cat Pumps 15 Frame pumps

650660661D105010511051D10571061X1061XD153015311540E1541156017301731