15 Frame plunger pump
650
- 26.5Flow, l/min
- 207Pressure, bar
- 1000Speed, rpm
- 10.73Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 26.5 l/min
- Pressure
- 207 bar
- Speed
- 1000 rpm
- Absorbed power
- 10.73 kW
- Plunger
- 20 mm
- Shaft
- Solid, Ø30 mm
- Weight
- 19 kg
Kits
Seal kits1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 30798 | Seal kit, NBR (STD) | 1 |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 30820 | Valve kit, NBR (STD) | 2 |
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 5 | 126540 | Screw, HHC (M8 x 20) | 8 |
| 8 | 134805 | Cover, Bearing | 2 |
| 9 | 855043 | Split Shim, Bearing Cover, 2-Piece | 0 |
| 10 | 11340 | O-Ring, Bearing Case | 2 |
| 11 | 43495 | Seal, Oil, Crankshaft | 2 |
| 12 | 855044 | Split Shim, Bearing Cover, 2-Piece | 0 |
| 15 | 39060 | Bearing, Roller | 2 |
| 20 | 48600 | Rod Assembly, Connecting | 3 |
| 25 | 43494 | Crankshaft Dual-End (M30) | 1 |
| 32 | 43211 | Cap, Oil Filler | 1 |
| 33 | 14177 | O-Ring, Filler Cap | 1 |
| 37 | 92241 | Gauge, Oil, Bubble with Gasket | 1 |
| 38 | 44428 | Gasket, Flat, Oil Gauge | 1 |
| 40 | 126541 | Screw, Sems HHC (M6 x 20) | 4 |
| 48 | 25625 | Plug, Drain ( 1/4" x 19 BSP) | 1 |
| 49 | 23170 | O-Ring, Drain Plug | 1 |
| 50 | 133576 | Cover, Rear | 1 |
| 51 | 44834 | O-Ring, Rear Cover | 1 |
| 53 | 134836 | Crankcase with Guide Pins (Includes: 54, 55) | 1 |
| 54 | 27488 | Pin, Guide | 2 |
| 55 | 126545 | Stud (M10 x 45) | 4 |
| 56 | 44664 | Pan, Oil | 1 |
| 64 | 43507 | Pin, Crosshead | 3 |
| 65 | 43501 | Rod, Plunger | 3 |
| 69 | 126592 | Washer, Seal | 3 |
| 70 | 43500 | Seal, Oil, Crankcase | 3 |
| 75 | 43506 | Slinger, Barrier | 3 |
| 88 | 45675 | Washer, Keyhole | 3 |
| 89 | 43505 | Spacer, Plunger | 3 |
| 90 | 43300 | Plunger (M20x77) | 3 |
| 96 | 43235 | Backup Ring, Plunger Retainer | 3 |
| 97 | 17399 | O-Ring, Plunger Retainer | 3 |
| 98 | 45891 | Gasket, Plunger Retainer | 3 |
| 99 | 104360 | Retainer with Stud, Plunger (M6) | 3 |
| 100 | 855001 | Retainer, Seal 2-Piece | 3 |
| 101 | 43508 | Wick, Long Tab | 3 |
| 106 | 44071 | Seal, Low-Pressure with SS-Spring | 3 |
| 120 | 49291 | Case, Seal | 3 |
| 121 | 14762 | O-Ring, Seal Case | 3 |
| 126 | 43515 | Adapter, Female | 3 |
| 127 | 44607 | V-Packing | 6 |
| 128 | 43517 | Adapter, Male | 3 |
| 139 | 20326 | Plug, Inlet ( 3/4" NPT[M]) | 1 |
| 162 | 43248 | Backup Ring, Seat | 6 |
| 163 | 43249 | O-Ring, Seat-80D | 6 |
| 164 | 43722 | Seat | 6 |
| 166 | 43721 | Valve | 6 |
| 167 | 43751 | Spring | 6 |
| 168 | 44564 | Retainer, Spring | 6 |
| 172 | 17617 | O-Ring, Valve Plug | 6 |
| 174 | 43850 | Plug, Valve | 6 |
| 185 | 45975 | Head, Manifold | 1 |
| 192 | 126231 | Lockwasher (M10) | 4 |
| 194 | 126522 | Nut, Hex (M10) | 4 |
| 250 | 855046 | Protector, Shaft with Two (2) Screws | 1 |
Motor
A 6-pole motor of at least 10.73 kW drives this pump at 1000 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 160La6 | 11 | 965 | IEC 160L | IE1 | 24.3 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RN 160La6) No Cat Pumps flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft No Cat Pumps coupling listed: you need one for a 42 mm motor shaft to 30 mm pump shaft.
Other Cat Pumps 15 Frame pumps
660661D105010511051D10571061X1061XD153015311540E15411560158017301731