PumpLookupPump and motor part numbers
Mains Units

60 Frame plunger pump

6747

  • 181.7Flow, l/min
  • 138Pressure, bar
  • 615Speed, rpm
  • 49.03Power, kW
Cat Pumps 60 Frame pump

Specification

Flow
181.7 l/min
Pressure
138 bar
Speed
615 rpm
Absorbed power
49.03 kW
Plunger
45 mm
Shaft
Solid, Ø45 mm
Weight
152 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits4

Part numberDescriptionPer pumpSuppliers
31173Crankcase Oil Seal Removal and Installation Kit1 
702349Seal kit, NBR (STD)1 
702350Seal kit, FPM (.0110)1 
703545Seal kit, EPDM (.0220)1 

Valves3

Part numberDescriptionPer pumpSuppliers
31273Valve kit, FPM (.0110)2 
34092Valve kit, NBR (STD)2 
76092Valve kit, EPDM (.0220)2 

Exploded view

Cat Pumps exploded view of the 60 Frame pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 89728 Screw, HH (M10 x 40)8
6 15847 Lockwasher (M10)8
7 19934 Washer, Flat (M10)8
8 29443 Cover, Bearing, Outer2
10 29444 O-Ring, Cover, Bearing2
11 11443 Seal, Oil, Crankshaft2
12 126594 Shim, Washer (M120 x 0.3), Bearing, Inner0
13 126595 Shim, Washer (M120 x 0.5), Bearing, Inner0
15 29441 Bearing, Roller2
16 29442 Cover, Bearing, Inner2
17 29444 O-Ring, Cover, Bearing2
20 126612 Rod, Connecting (Includes: 21, 22)3
21 126560 Washer, Locking3
22 126593 Shim, Washer (M10.5 x 1.5)6
25 29440 Crankshaft, Dual-End (M65.5)1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Oil Filler Cap1
34 126743 Bolt, Eye (M12 x 1.75) (For Lifting Pump Only)1
38 129343 Gasket, Flat Flexible1
39 27769 Dip Stick (Blue)1
40 89627 Screw, HH (M10 x 30)8
41 15847 Lockwasher (M10)8
42 19934 Washer, Flat (M10)8
48 25625 Plug, Drain (1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug1
50 29438 Cover, Rear1
51 129386 Gasket, Rear Cover1
53 133667 Crankcase Assembly (Includes: 54)1
54 43282 Pin, Guide2
55 89615 Stud (M16 x 70)2
64 29481 Pin, Crosshead3
65 45384 Rod, Plunger3
69 126588 Washer, Oil Seal3
70 29454 Seal, Oil, Crankcase3
75 44752 Slinger, Barrier3
88 45677 Washers, Keyhole (M14)3
90 45672 Plunger (M45 x 185)3
95 44748 Stud, Plunger Retainer (M14 x 147)3
96 20214 Backup Ring, Plunger Retainer3
97 49839 O-Ring, Plunger Retainer3
98 44751 Gasket, Plunger Retainer3
99 44750 Retainer, Plunger (M14)3
100 702014 Retainer, Seal3
104 18178 O-Ring, Inlet Adapter3
105 701355 Adapter, Low-Pressure Seal3
106 106147 Seal, Low-Pressure with SS-Spring3
107 701580 Spacer, Low-Pressure3
110 44754 Manifold, Inlet1
112 18175 O-Ring, Spacer, Inner3
114 44767 Spacer, Inlet Manifold3
115 18175 O-Ring, Spacer, Outer3
116 19086 Lockwasher (M16)4
117 89729 Screw, HH (M16 x 55)4
123 18178 O-Ring, Cylinder, V-Packing3
124 701357 Cylinder, V-Packing3
126 701358 Adapter, Female3
127 104450 V-Packing6
128 701359 Adapter, Male3
155 701978 O-Ring, Spacer3
156 701361 Backup Ring, Spacer Inner3
157 701362 Spacer, V-Packing with Coil Springs3
158 701363 Backup Ring, Spacer Outer3
159 18178 O-Ring, Spacer3
160 44756 Pin, Guide2
163 18176 O-Ring, Seat6
164 44772 Seat6
166 44774 Valve6
167 44773 Spring6
168 44775 Retainer, Spring6
170 44776 Washer, Retainer6
171 44780 Spring, Coil, Valve Plug6
172 128857 O-Ring, Valve Plug6
174 44778 Plug, Valve6
185 44769 Manifold, Discharge1
186 19086 Lockwasher (M16)2
188 89694 Screw, HSH (M16 x 110)8
194 81291 Nut, Hex (M16)2
250 29445 Protector, Shaft1
255 33243 Mount, Direct1
256 29649 Washer, Slant (M16) (Ensures Proper Alignment Between the Rail and Mounting Screw)4
259 126604 Rail, Box2

Motor

This pump needs 49.03 kW at 615 rpm, more than the largest motor of that speed listed here.

Flange

The flange depends on the motor, so it is chosen with the motor.

Coupling

The coupling depends on the motor shaft, so it is chosen with the motor.

Other Cat Pumps 60 Frame pumps

676067616762676767756707067102