PumpLookupPump and motor part numbers
Mains Units

68 Frame block-style plunger pump

6831

  • 151.4Flow, l/min
  • 159Pressure, bar
  • 625Speed, rpm
  • 46.99Power, kW
Cat Pumps 68 Frame block-style pump

Specification

Flow
151.4 l/min
Pressure
159 bar
Speed
625 rpm
Absorbed power
46.99 kW
Plunger
40 mm
Shaft
Solid, Ø45 mm
Weight
187 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits4

Part numberDescriptionPer pumpSuppliers
31192Seal kit, FFKM (.0770)1 
33708Seal kit, FPM (.0110)1 
701647Seal kit, NBR (STD)1 
703476Seal kit, EPDM (.0220)1 

Valves4

Part numberDescriptionPer pumpSuppliers
31952Valve kit, EPDM (.0220)2 
31955Valve kit, FPM (.0110)2 
34017Valve kit, NBR (STD)2 
76617Valve kit, FFKM (.0770)2 

Other kits1

Part numberDescriptionPer pumpSuppliers
33243Mount, Direct 

Exploded view

Cat Pumps exploded view of the 68 Frame block-style pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 89728 Screw, HH (M10 x 40)8
6 15847 Lockwasher (M10)8
7 19934 Washer, Flat (M10)8
8 29443 Cover, Bearing, Outer2
10 29444 O-Ring, Bearing Cover-70D2
11 11443 Seal, Oil, Crankshaft-70D2
12 126594 Washer, Shim (M120 x 0.3)0
13 126595 Washer, Shim (M120 x 0.5)0
15 29441 Bearing, Roller2
16 29442 Cover Bearing, Inner2
17 29444 O-Ring, Bearing Cover-70D2
20 126612 Assembly, Connecting Rod (Includes: 21, 22)3
21 126560 Washer, Locking3
22 126593 Washer, Shim (M10.5 x 1.5)6
25 29440 Crankshaft, Dual End (M65.5)1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Filler Cap-70D1
34 126743 Bolt, Eye (M12) (For Lifting Pump Only)1
38 129343 Gasket, Flat Flex1
39 27769 Stick, Dip1
40 89627 Screw, HH (M10 x 30)8
41 15847 Lockwasher (M10)8
42 19934 Washer, Flat (M10)8
48 25625 Plug, Drain (1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug-70D1
50 29438 Cover, Rear1
51 129386 Gasket, Rear Cover1
53 133667 Crankcase (Includes: 34, 54)1
54 43282 Pin, Guide2
64 29481 Pin, Crosshead3
65 48735 Rod, Plunger3
69 126588 Washer, Oil Seal3
70 29454 Seal, Oil, Crankcase-80D3
75 43865 Slinger, Barrier3
88 45676 Washer, Keyhole (M16)3
90 43921 Plunger (M40 x 145)3
95 89778 Stud, Plunger Retainer (M10 x 135)3
96 20189 Backup Ring, Plunger Retainer3
97 11345 O-Ring, Plunger Retainer-70D3
98 44085 Gasket, Plunger Retainer3
99 44084 Retainer, Plunger (M10)3
100 703084 Retainer, Seal3
106 44113 Seal, Low-Pressure with SS-Spring3
108 45381 Spacer, Low-Pressure3
110 701321 Manifold Inlet, Block-Style1
111 701116 Plug, Inlet Manifold (11/2" NPT[M])1
112 701632 O-Ring, Inlet Spacer6
113 701329 Backup Ring, Spacer6
114 701327 Spacer, Inlet3
117 89694 Screw, HSH (M16 x 110)6
118 701077 Plug (1/4" NPT[M])3
126 45367 Adapter, Female3
127 44609 V-Packing6
128 704480 Adapter, Male3
155 48860 O-Ring, V-Packing Spacer, Inner -90D3
156 48362 Backup Ring, V-Packing Spacer6
157 45369 Spacer, V-Packing3
159 48860 O-Ring, V-Packing Spacer, Outer-90D3
160 44756 Pin, Guide2
162 48363 Backup Ring, Seat6
163 26142 O-Ring, Seat-80D6
164 44612 Seat6
166 44108 Valve6
167 44109 Spring6
168 44728 Retainer, Spring6
170 44729 Washer, Retainer6
171 44644 Spring, Coil6
172 89827 O-Ring, Valve Plug-90D6
173 48364 Backup Ring, Valve Plug6
174 701432 Plug, Valve6
175 87951 Screw, HSH (M10 x 30)36
185 701431 Manifold, Discharge, Block-Style1
188 701279 Screw, HSH (M12 x 100), Lower4
193 89694 Screw, HSH (M16 x 110), Upper8
250 29445 Protector, Shaft1
255 33243 Kit, Mount1
256 29649 Washer, Slant (M16) (Ensures Proper Alignment Between the Rail and Mounting Screw)4
259 126604 Rail, Box2

Motor

This pump needs 46.99 kW at 625 rpm, more than the largest motor of that speed listed here.

Flange

The flange depends on the motor, so it is chosen with the motor.

Coupling

The coupling depends on the motor shaft, so it is chosen with the motor.

Other Cat Pumps 68 Frame block-style pumps

68016810681168216832683568416861