PumpLookupPump and motor part numbers
Mains Units

35 Frame plunger pump

3535

  • 136.3Flow, l/min
  • 83Pressure, bar
  • 800Speed, rpm
  • 22.06Power, kW
Cat Pumps 35 Frame pump

Specification

Flow
136.3 l/min
Pressure
83 bar
Speed
800 rpm
Absorbed power
22.06 kW
Plunger
40 mm
Shaft
Solid, Ø35 mm
Weight
63 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits4

Part numberDescriptionPer pumpSuppliers
31040Seal kit, standard NBR1 
32273Crankcase Oil Seal Removal and Installation Kit1 
33055Seal kit, NBR (STD)1 
33262Seal kit, FPM (.0110)1 

Valves3

Part numberDescriptionPer pumpSuppliers
31952Valve kit, EPDM (.0220)2 
31955Valve kit, FPM (.0110)2 
34235Valve kit, NBR (STD)2 

Exploded view

Cat Pumps exploded view of the 35 Frame pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 96049 Screw, HHC Sems (M10 x 25)8
8 134604 Cover, Bearing2
9 815279 Shim, Split 2-Piece2
10 12398 O-Ring, Bearing Cover2
11 13296 Seal, Oil, Crankshaft2
12 855049 Shim, Split 2-Piece0
15 29326 Bearing, Roller2
20 121467 Rod, Connecting Assembly (Includes: 21, 22, 23)3
21 126749 Locking Washer (M10)3
22 126593 Washer, Flat (M10.5)6
23 122045 Screw, HH (M10 x 55)6
25 29325 Crankshaft, Dual-End (M48)1
31 828710 Protector, Oil Cap with Foam Gasket1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Oil Filler Cap1
34 126743 Bolt, Eye (M12 x 1.75) (For Lifting Pump Only)1
37 92241 Gauge, Oil, Bubble with Gasket1
38 44428 Gasket, Flat, Oil Gauge1
40 125753 Screw, HHC Sems (M8 x 25)8
48 25625 Plug, Drain ( 1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug1
50 45936 Cover, Rear1
51 16612 O-Ring, Crankcase Cover1
53 134784 Crankcase Assembly (Includes: 54)1
54 27488 Pins, Guide2
56 27790 Pan, Oil1
59 92538 Screw, HHC Sems (M6 x 16)2
64 43864 Pin, Crosshead3
65 45116 Rod, Plunger3
69 126587 Washer, Oil Seal3
70 100488 Seal, Oil, Crankcase3
75 43865 Slinger, Barrier3
88 45676 Washer, Keyhole (M16)3
90 43921 Plunger (M40 x 145)3
95 89778 Stud, Plunger Retainer (M10 x 135)3
96 20189 Backup Ring, Plunger Retainer3
97 11345 O-Ring, Plunger Retainer3
98 44085 Gasket, Retainer3
99 44084 Retainer, Plunger (M10)3
100 814279 Retainer, Seal, 2-Piece3
101 44112 Wick, Long Tab3
106 44113 Seal, Low-Pressure with SS-Spring3
110 49464 Manifold, Inlet1
110 670305 Manifold, Inlet, Flushed1
112 11379 O-Ring, Inlet Manifold3
117 44585 Screw, HSH (M14 x 40)4
126 46494 Adapter, Female3
127 44609 V-Packing6
128 43928 Adapter, Male3
141 49519 Spring, Large Coil3
155 48860 O-Ring, V-Packing Spacer6
156 48362 Backup Ring, V-Packing Spacer6
157 49478 Spacer, V-Packing3
162 48363 Backup Ring, Valve Seat6
163 26142 O-Ring, Seat6
164 44727 Seat, Stepped6
166 43932 Valve6
167 44109 Spring6
168 44728 Retainer, Spring6
170 44729 Washer, Spring Retainer6
171 44644 Coil Spring (70 kg), Valve Plug6
172 89827 O-Ring, Valve Plug6
173 48364 Backup Ring, Valve Plug6
174 46444 Plug, Valve6
185 49465 Manifold, Discharge1
188 89981 Screw, HSH (M12 x 70)8
250 855042 Protector, Shaft with Two (2) Screws, Lockwashers and Washers1

Motor

This pump needs 22.06 kW at 800 rpm, more than the largest motor of that speed listed here.

Flange

The flange depends on the motor, so it is chosen with the motor.

Coupling

The coupling depends on the motor shaft, so it is chosen with the motor.

Other Cat Pumps 35 Frame pumps

35013507HS3511DHS3517HS35203521DHS3527HS3531CHS3531DHS3535HS3537HS3541DHS35453545HS3547HS355035603560RST1435703570S