PumpLookupPump and motor part numbers
Mains Units

35 Frame plunger pump

3560

  • 76Flow, l/min
  • 275Pressure, bar
  • 1160Speed, rpm
  • 40.86Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Cat Pumps 35 Frame pump

Specification

Flow
76 l/min
Pressure
275 bar
Speed
1160 rpm
Absorbed power
40.86 kW
Plunger
25 mm
Shaft
Solid, Ø35 mm
Weight
64.4 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits4

Part numberDescriptionPer pumpSuppliers
31280Seal Kit, standard NBR1 
31380Seal kit, FPM (.0110)1 
32273Crankcase Oil Seal Removal and Installation Kit1 
76376Seal kit, STHT (.3400)1 

Valves2

Part numberDescriptionPer pumpSuppliers
31292Valve kit, NBR (STD)1 
31296Valve kit, FPM (.0110)1 

Exploded view

Cat Pumps exploded view of the 35 Frame pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 96049 Screw, Sems (M10 x 25)8
8 134604 Cover, Bearing2
9 815279 Shim, Split, 2-Piece0
10 12398 O-Ring, Cover, Bearing2
11 13296 Seal, Oil, Crankshaft2
12 855049 Shim, Split, 2-Piece0
15 29326 Bearing, Roller2
20 121467 Rod, Connecting (Includes: 21, 22, 23)3
21 126749 Washer, Locking (M10)3
22 126593 Shim, Washer (M10.5 x 1.5)6
23 122045 Screw, HH (M10 x 55)6
25 29325 Crankshaft, Dual-End (M48)1
31 828710 Protector, Oil Cap with Foam Gasket1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Oil Filler Cap1
34 126743 Bolt, Eye (M12 x 1.75) (For Lifting Pump Only)1
37 92241 Gauge, Oil, Bubble with Gasket3
38 44428 Gasket, Flat, Oil Gauge3
40 125753 Screw, HHC Sems (M8 x 25)8
48 25625 Plug, Drain (1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug1
50 45936 Cover, Rear1
51 16612 O-Ring, Crankcase1
53 134786 Crankcase Assembly (Includes: 54)1
54 27488 Pins, Guide2
56 27790 Pan, Oil1
59 92538 Screw, HHC Sems (M6 x 16)2
64 43864 Pin, Crosshead3
65 49076 Rod, Plunger3
69 126587 Washer, Oil Seal3
70 100488 Seal, Oil, Crankcase3
75 110669 Slinger, Barrier3
88 110670 Washer, Keyhole (M16)3
90 48535 Plunger (M25 x 110)3
95 126549 Stud, Plunger Retainer (M7 x 103)3
96 20184 Backup Ring, Plunger Retainer3
97 14190 O-Ring, Plunger Retainer3
98 44069 Gasket, Retainer3
99 44068 Retainer, Plunger (M7)3
100 855017 Retainer, Seal 2-Piece3
101 44096 Wick, Long Tab3
106 44086 Seal, Low-Pressure, with SS-Spring3
110 49759 Manifold, Inlet1
112 11379 O-Ring, Inlet Manifold3
117 44585 Screw, HSH (M14 x 40)4
126 48538 Adapter, Female3
127 44610 V-Packing6
128 48539 Adapter, Male3
155 17629 O-Ring, Spacer V-Packing6
156 28243 Backup Ring, Spacer V-Packing6
157 49082 Spacer, V-Packing3
160 49092 O-Ring, Seat, Inlet3
161 49091 Seat, Inlet3
162 49088 Backup Ring, Discharge Seat3
163 49087 O-Ring, Seat, Discharge3
164 49086 Seat, Discharge3
165 49090 Retainer, Spring, Inlet3
166 49089 Valve6
167 44109 Spring6
168 49085 Retainer, Spring, Discharge3
172 18690 O-Ring, Valve Plug3
173 20369 Backup Ring, Valve Plug3
174 49093 Plug, Valve3
175 550176 Screw, HSH (M14 x 35)12
185 49084 Manifold, Discharge1
188 49045 Screw, HSH (M12 x 95)8
250 855042 Protector, Shaft with 2-Screws, Lockwashers and Washers (Included with Pump)1

Motor

Rated at 1160 rpm, the speed of a 6-pole motor on a 60 Hz supply. Ask a supplier before running it on a 50 Hz motor.

Flange

The flange depends on the motor, so it is chosen with the motor.

Coupling

The coupling depends on the motor shaft, so it is chosen with the motor.

Other Cat Pumps 35 Frame pumps

35013507HS3511DHS3517HS35203521DHS3527HS3531CHS3531DHS35353535HS3537HS3541DHS35453545HS3547HS35503560RST1435703570S