PumpLookupPump and motor part numbers
Mains Units

35 Frame plunger pump

3570

  • 113.6Flow, l/min
  • 170Pressure, bar
  • 1080Speed, rpm
  • 38.31Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Cat Pumps 35 Frame pump

Specification

Flow
113.6 l/min
Pressure
170 bar
Speed
1080 rpm
Absorbed power
38.31 kW
Plunger
32 mm
Shaft
Solid, Ø35 mm
Weight
63 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits4

Part numberDescriptionPer pumpSuppliers
32273Crankcase Oil Seal Removal and Installation Kit1 
76841Seal kit, NBR (STD)1 
76842Seal kit, FPM (.0110)1 
76843Seal kit, EPDM (.0220)1 

Valves3

Part numberDescriptionPer pumpSuppliers
76794Valve kit, NBR (STD)2 
76831Valve kit, FPM (.0110)2 
76869Valve kit, EPDM (.0220)2 

Exploded view

Cat Pumps exploded view of the 35 Frame pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 96049 Screw, HHC, Sems (M10 x 25)8
8 134604 Cover, Bearing2
9 815279 Shim, Split, 2-Piece2
10 12398 O-Ring, Bearing Cover2
11 13296 Seal, Oil, Crankshaft2
12 855049 Shim, Split, 2-Piece0
15 29326 Bearing, Roller2
20 121467 Rod, Connecting Assembly (Includes: 21, 22, 23)3
21 126749 Washer, Locking (M10)3
22 126593 Washer, Flat (M10.5)6
23 122045 Screw, HH (M10 x 55)6
25 29325 Crankshaft, Dual-End (M48)1
31 828710 Protector, Oil Cap with Foam Gasket1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Oil Filler Cap1
34 126743 Bolt, Eye (M12 x 1.75) (For Lifting Pump Only)1
37 92241 Gauge, Oil, Bubble with Gasket1
38 44428 Gasket, Flat, Oil Gauge1
40 125753 Screw, HHC, Sems (M8 x 25)8
48 25625 Plug, Drain ( 1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug1
50 45936 Cover, Rear1
51 16612 O-Ring, Rear Cover1
53 134784 Crankcase Assembly (Includes: 54)1
54 27488 Pins, Guide2
56 27790 Pan, Oil1
59 92538 Screw, HHC, Sems (M6 x 16)2
64 43864 Pin, Crosshead3
65 49166 Rod, Plunger3
69 126587 Washer, Oil Seal3
70 100488 Seal, Oil, Crankcase3
75 43865 Slinger, Barrier3
88 45676 Washer, Keyhole (M16)3
90 43957 Plunger (M32 x 145)3
95 89778 Stud, Plunger Retainer (M10 x 135)3
96 20189 Backup Ring, Plunger Retainer3
97 11345 O-Ring, Plunger Retainer3
98 44085 Gasket, Retainer3
99 44084 Retainer, Plunger (M10)3
100 44119 Retainer, Seal3
101 44106 Wick, Long Tab3
104 43875 O-Ring, Adapter3
105 49741 Adapter, Low-Pressure Seal3
106 44098 Seal, Low-Pressure with SS-Spring3
107 43962 Washer, Low-Pressure Seal3
110 49464 Manifold, Inlet1
110 670305 Manifold, Inlet, Flushed1
112 11379 O-Ring, Inlet Manifold3
117 44585 Screw, HSH (M14 x 40)4
122 49744 Spacer, V-Packing3
123 12391 O-Ring, Spacer3
124 49742 Cylinder, V-Packing3
126 43963 Adapter, Female3
127 44608 V-Packing6
128 43965 Adapter, Male3
141 49743 Spring, Coil3
155 48860 O-Ring, V-Packing Cylinder3
156 48362 Backup Ring, V-Packing Cylinder3
162 48363 Backup Ring, Valve Seat6
163 26142 O-Ring, Valve Seat6
164 133052 Seat, Valve6
166 43932 Valve6
167 133053 Spring6
168 44728 Retainer, Spring6
170 44729 Washer, Spring6
171 44644 Spring, Coil6
172 89827 O-Ring, Valve Plug6
173 48364 Backup Ring, Valve Plug6
174 44643 Plug, Valve6
185 670327 Manifold, Discharge1
188 89981 Screw, HSH (M12 x 70)8
250 855042 Protector, Shaft with 2 Screws, Lockwashers and Washers (Included with Pump)1

Motor

This pump needs 38.31 kW at 1080 rpm, more than the largest motor of that speed listed here.

Flange

The flange depends on the motor, so it is chosen with the motor.

Coupling

The coupling depends on the motor shaft, so it is chosen with the motor.

Other Cat Pumps 35 Frame pumps

35013507HS3511DHS3517HS35203521DHS3527HS3531CHS3531DHS35353535HS3537HS3541DHS35453545HS3547HS355035603560RST143570S